Lancer Register Forum banner
1 - 4 of 4 Posts

306 Posts
Discussion Starter · #1 ·
Hi guys, on my AVC_R there are 6 wires,

RED wire=ignition power
PURPLE wire= Rpm signal . Injector signal
GREEN wire= Ground
BLACK wire= Ground
GRAY wire= throttle sensor
WHITE wire= Speed signal

The problem lies with the purple wire as I dont know which one to connect to:wallbang::wallbang::wallbang:, is it the RPM signal or is it the Injector signal:confused::confused::confused:?
Any help would be grateful:smthumbup
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.