Lancer Register Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter · #1 ·
Just come back from interpro and my e4 recorded 352bhp at 6000 rpm and 330lbft at 3400 rpm holding 1.5 bar of boost. This was with a dodgy actuator which was a bit week and the standard e4 intercooler. Its booked back in now for a new actuator and a big cooler the guy said it should then have 370bhp and 345lbft at 1.65 bar of boost. :D
 

·
Registered
Joined
·
2,715 Posts
you must have quite a few mods already then to be pushing them figures :coolsm:
 

·
Premium Member
Joined
·
14,884 Posts
Whats modifications does the car have?

I hope those figures are not on the stock pistons, pump, injectors! :eek:

Did you buy the E4 off ebay ? (E6 engine etc)
 

·
Registered
Joined
·
187 Posts
Discussion Starter · #6 ·
its got a e6 engine, power engineering stage 2 ecu, titanium turbo, walbro fuel pump, tubular manifold, 3" exhaust all the way through, hks filter, arp rod bolts and head studs, blitz dump valve, apexi boost controller and a fuel pressure regulator the mechanic said the engine was rock solid and the compression was spot on so im well happy, for now anyway.
 
1 - 13 of 13 Posts
Top