Got a few Evo X Parts I am looking to sell before christmas.
Evo X Drenth Dog Gear Kit - brand new - £4995 - cheaper than anywhere else in UK
Evo X RS ACD Pump - Brand New - £1450
Evo X RS ACD Pump - Off 0km Car - £1250
Evo X Engine Parts from new crate engine
Flywheel + Clutch - £400...
I have for sale my Borg Warner EFR 7163 Turbo Kit.
Run it for 5000miles and bought on the MLR. It is a 500/550HP turbo with No lag and incredible spool and response. The best road turbo for 2 liters Evo in my opinion!
- Full race Exhaust manifold with 4 lambdas bungs and 2 EGT Bung
My evo 6 (173.xxx kms) drives normally when I drive calm. But when I give it WOT it boosts to 1.3 bar (peak) then starts jolting heavily and boost drops to 0.8 bar. I'm running a evo 8 turbo.
Things I have already changed:
BOV: evo 8 MR fitted
Wastegate actuator: Evo 8 fitted with appropiate...
Hello all, I would like advice from the knowledgeable members on here.
I own a 1999 RVR X3 Sports Gear. The one with the 4g63t engine, mine has a tiptronic box.
Its in good condition, no dents or obvious rust, very good inside also.
Don't have any pics online to share yet, but this is almost...
hey all, i have a lancer 2.0 turbo diesel sportback. 36,000 miles and 6 years old.
well i was driving along and decided to put my foot down a little bit to accelerate and noticed there was no pick up from the turbo. ive been to a garage and had it on diagnostics which they said their was a fault...
I currently have an evo 4 with an evo 6 motor, still running the evo 4 turbo.
I am going to get it tuned at some stage soon and would like to know if it would be worth while me upgrading the turbo to an evo 8 turbo. A TD05-HRA-9.8T is the turbo that I am thinking about as it has the titanium...
i replaced my Rad yesterday, in the process i had to take the inlet hardpipe out, i disconnected all four hoses from it, i also cleaned the mushroom filter. As far as i know i have put it all back correctly. When everything was back together and i took it for a test drive i noticed the BOV was...
Hi, just purchased a turbo off an Evo 9 (TD05HR-16G5C-10.5T) for my Evo 4 GSR. I plan on running the HKS 272 cams, already has a uprated fuel pump, 3" stainless exhaust, stainless manifold, and stainless elbow.
Just wondering what injectors will i need for the best set up? And while I'm here i...
I have a JAC J5 AT(a chinese company which used mitsubishi engine & transmission), it has a 1.8 4g93d DOHC MPI engine and F4A4B automatic transmission.
I know that mitsubishi also produced turbo variants of this engine with TD04 turbocharger.
I want to know is it possible that I buy...
Selling my brand new Atp turbos Garrett gtx3076r stock location turbo kit, full twin scroll design using original manifold and elbow flanges, twin flapper internal waste gate, dual roller bearing turbo, has the 4" inlet option. Capable of up to 650hp!
Steel braided oil feed line assembly with...
Okay all, I have for sale my Garrett GTX3582 setup. I am selling the complete setup, Turbo, manifold, and all the relevant bits in between, It is a vband connection. I have attached a link to the Garrett page for technical details on the product. This was brand new last year and performed...
Just wanted to say a huge thanks to Dave, Ady and Matt at M.G Autosport
I lost power on my Evo X 300 SST on 18 December, in a big way.
After taking it to a local mechanic he gave me the worst news I could get, the turbo had seized :rotz:
After getting quotes from several places I was looking...
I'm selling this EVO8 RS compressor housing which was machined out and comes with a 33mm restrictor. It's as new condition.
Located near Reading, but can post.
Contact via PM.
Got a 7 RS turbo fitted to my V to replace the one at the end of it's life. However it seems to take a lot longer to come on full boost than my old V turbo.
It now seems to be over 4250rpm by the time it reaches full boost. I'm sure my old turbo was on full boost at 3500rpm.
It's making the...