Lancer Register Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 18 Results
  1. Private Sales - Parts
    New and unused set of 1000cc ID Injectors. Never fitted and complete with wires and plugs. £380. Thanks Evo 4-9
  2. Private Sales - Parts
    Skunk2 pro intake manifold for mitsubishi Evo 4-9 complete with aftermarket aluminium fuel rail and ID1000cc Injectors fitted. All thease parts are in brand new and unused condition!! They were bought new a few years ago, fitted to an engine build that was never completed so therefore never...
  3. Private Sales - Parts
    I have a set of RC750 Injectors, taken off my car before upgrading to 1000cc. Come in original box and have a flow report with them. Should have the original receipt for these, cost over £400 new. £150
  4. Technical Questions
    Iv just swapped an engine in my 8 and iv got one cylinder that doesn't seem to be firing as the other 3 manifolds are getting hot but this one isn't. Iv swapped coil packs around and still misses on the same cylinder. I swapped injectors around and still misses on the same cylinder. I'm pretty...
  5. Private Sales - Parts
    For sale is a set of 1000cc ASNU injectors. These are only 6 months old and were used for 4 outings of my time attack car, so probably less than 4 hours of usage. They are able to take any type of race fuel, including acetone based fuels, such as VP Import. Performed flawlessly on my TA car...
  6. Engine / Turbo
    Hi, just purchased a turbo off an Evo 9 (TD05HR-16G5C-10.5T) for my Evo 4 GSR. I plan on running the HKS 272 cams, already has a uprated fuel pump, 3" stainless exhaust, stainless manifold, and stainless elbow. Just wondering what injectors will i need for the best set up? And while I'm here i...
  7. Technical Questions
    Hi everyone. I was wondering if you had any experience with the injectors above. I heard rumours of RCs and IDs, and I was curious if anyone had experience with them. Cheers
  8. Technical Questions
    As above can anyone please tell me what the main differences are between an EVO 8 260 and an EVO 8 MR other than the aluminium roof and cosmetic changes and whether I could source the various bits to "convert" a 260 to MR spec or similar. In particular am interested to know if the injectors...
  9. Private Sales - Parts
    Hi All, ID2000's for sale (Blue tops), done 291 miles and have 6 months warranty left on them - £450 free P&P E7 Gear box, 5speed. Around 53000 miles on it with a rebuild 10k miles ago. The synchros were upgraded. It was sometimes (irregularly) catching from 2nd into 3rd at high rpm - £400 +...
  10. Technical Questions
    Hey guys wondering if some one can help me out my evo 4 has yellow top injectors and somebody once said its better to get a different colour but I can't remember which colour he said any advice would be great :)
  11. Technical Questions
    Hello. I have a evo 8 I currently have the following mods: - 3" full turbo back exhuast system no cat - AEM tru boost controller - HKS updated grade 8 spark plugs - fuel pump. - induction kit. - custom remap I was thinking move to 660 or 750 injectos ? I'm I ready ? Will make a big...
  12. Private Sales - Parts
    Hi, I am selling some used/new bits after removing them from my setup. Used Wiseco 2.3 Stroker Pistons 85mm Bore £200 (Just done 1000 miles and taken out by RG Motorsport) Scorpion 3 Inch Downpipe will fit 789 Stock Location Sold Turbo Techincs 3 Inch True Elbow will fit 789 Sold Evo IX...
  13. Vendor Spotlight! Great Deals for Members
    Are you looking for the absolute best injectors you can buy? Whether a tuner, or an end user the best thing you can do is educate yourself. What qualities and specifications define "the best injector?" What injector data do you absolutely need to insure a consistent tune? How will the dynamic...
  14. Private Sales - Parts
    It's been such a long time since I post here on the MLR. Hope some of the old lads are still hanging about. Moses, if you're out there send me some blessings m8. :D Just want to sell some personal parts from my ex-race car. Custom made intake manifold to suit evos 4 and up. Built to flow...
  15. Private Sales - Parts
    FOR SALE MITSUBISHI LANCER EVO 4 5 6 7 8 4G63 TOP FEED FUEL RAIL (PURPLE) WITH FUEL LAB GAUGE. PLUS RC 750CC Fuel Injectors Mitsubishi Lancer Evolution 4Pc RC Fuel Injectors. These Are Low Resistance(Approx. 2.5/3 OHMS) Peak and Hold Fuel Injectors And Are Flow Matched. Application:- All...
  16. Wanted
    Hi! I looking to buy bigger injectors for my engine project. It will run with Ethanol and the goal is to reach about 500-550 Whp. So if u have 4 injectors that will work on my build pls let me know Mejl: nice_bmw_5@hotmail.com Best regard, Björn
  17. Wanted
    Need both 510cc & 560cc injectors :smthumbup
1-17 of 18 Results
Top