Lancer Register Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Technical Questions
    Hi, I have an Evo 4, the speedo stopped working which turned out to be the speedometer drive gear in the gearbox. Ordered a new one from Ross Sport, Mitsubishi part number MR980287. I've just tried to fit it and the two key ways which hold it in position are larger on the new one. Wonder if...
  2. Newbie
    Hi folks, long time lurker, new member. I used to be into the DSM (Partnership between Mitsubishi and Chrystler here in the states, that produced the Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, all using the 4G63 and 4G63T) back in the early 2000s, but I eventually moved onto other...
  3. Wanted
    Hi everyone anyone has a lambda for an evo 4? Im going crazy to find out one... i can't understand why i can't find it on the web People tell me the evo 4 lambda has 3 wires.. i only find 2 or 4 wires I hope that someone can help me for this If you have got one you can write me on ...
  4. Newbie
    Just a quick hello, new owner of a 1996 Evo 4 imported in 97. Showing a little of its 20 year old age with a few small dents in the bodywork, but won't be like that for long :smthumbup
  5. Engine / Turbo
    :handsup:Hi, I have an evo4, with a full evo7 set up and aftermarket management, running stock waste gate boost (0.6-0.8 bar) I was advised not to turn turn boost up as I have the habit of braking engines ( this being nr5), should I, meth kit, nos,cams, head work, ? Iv got 255pump, hks exhaust...
  6. Engine / Turbo
    Hi, just purchased a turbo off an Evo 9 (TD05HR-16G5C-10.5T) for my Evo 4 GSR. I plan on running the HKS 272 cams, already has a uprated fuel pump, 3" stainless exhaust, stainless manifold, and stainless elbow. Just wondering what injectors will i need for the best set up? And while I'm here i...
  7. Wanted
    Hi everyone. I am after a pair of EVO4 front brake discs. It is 296mm, comes with the 2pot brake setup originally. I would prefer the stylish slotted dimpled grooved ones, and must be useable, with little wear. I can pick up in hampshire, or maybe midlands, or postage if possible. Thanks for...
  8. Technical Questions
    In the process of moving my evo 8 engine into the 4 shell but the subframe/steering rack is causing a problem. Could I modify the 8 subframe to fit? I.e make a plate to bolt to it so that it will bolt in on the rear bolts? Or is there a conversion kit available for it?
  9. Technical Questions
    Hey guys wondering if some one can help me out my evo 4 has yellow top injectors and somebody once said its better to get a different colour but I can't remember which colour he said any advice would be great :)
  10. Wanted
    Hello, I am after a grey/silver Evo 4 rear bumper, with the skirt also would be great. It needs to be in good condition or a near as. I am near plymouth if its local otherwise I would also need it posted to me if possible. I hope someone can help Cheers JAB1a :mitsi:
  11. Wanted
    I am looking for a set of adjustable cam Pulleys to go with my Piper 272's cams. anyone have anything laying around please let me know. I am not looking to spend a huge chunk of money for new brand name ones so I think sligtly used ones will do the trick. I have been waiting on answers for a...
  12. ECU / Mapping
    Hi I have an evo and its mucking about, the engine was rebuilt by wincanton motorsport but it is over fueling like a bugger does about 8 mpg. they say the cant remap as the ecu has been buggered about with. it now runs even worse, think they have been playing with the valve control and boost and...
1-12 of 12 Results