Lancer Register Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 12 Results
  1. Private Sales - Parts
    MLR Memebers Whats here is only available, this offer will not be repeated its purely based on the first customer paying first hence its not based on a pm. Stock availability is what is available and there is no offer on other cams. Fitment is listed on the cam part numbers as per the...
  2. Private Sales - Parts
    Hi! For sale are Evo 9 Mivec 280° Cosworth cams, with 11.6mm lift. They are like new, only on dyno tested. (changed my setup to 272° cams) Newprice 520gbp. For a quick sale: 390gbp shipped. PM or mail ([email protected]) for questions or pictures. :smthumbup
  3. Wanted
    I have a fairly standard MR FQ300 running 360bhp. I am looking for the bits which will help it on it's way to 400bhp / close torque. I already have a decat exhaust fitted, but am looking for the following uprated bits: Decent cold air intake 272 Cams ECU - Power FC or similar Exhaust manifold...
  4. Wanted
    Hi everyone. I'm after the following bits. Kelford 272s Adjustable cam pulleys (no ebay special please) New or near new oil pump Fluidamper Injectors around 1000cc EVO9 oil cooler B8 Bilsteins front and rear Eibach or Spec-R springs EVO9 sump Any bottom end EVO5 upwards, mainly block and...
  5. Technical Questions
    As above can anyone please tell me what the main differences are between an EVO 8 260 and an EVO 8 MR other than the aluminium roof and cosmetic changes and whether I could source the various bits to "convert" a 260 to MR spec or similar. In particular am interested to know if the injectors...
  6. Wanted
    hks 272/272 cams or something that will run on oem springs! looking for some second hand cam's for my 5 engine but not looking to change the springs at this moment and they say the hks will run on oem spring ok if not what you got
  7. Technical Questions
    I have a dilemma. I am currently looking at buying a newer Evo VIII and sell my four. I have tons of brand new parts from my four that I would like to tranfer to the VIII. I need to know if my GSC S2 cams, valve springs and retainers will fit the newer EVO.
  8. Engine / Turbo
    Hi everyone. Am close to buying a new set of cams on my e7 fq300, and was wondering about a couple of things. Am trying to reach 400bhp 1) Will I need it remapped after? my performance spec running at 372bhp currently; ss exhaust manifold and elbow, downpipe and decat, japspeed induction...
  9. Wanted
    I am looking for a set of adjustable cam Pulleys to go with my Piper 272's cams. anyone have anything laying around please let me know. I am not looking to spend a huge chunk of money for new brand name ones so I think sligtly used ones will do the trick. I have been waiting on answers for a...
  10. Engine / Turbo
    hi, i have a set of cam that cam with my car dont relly know what they are, there are no markings on either ends on the inlet cam all it says is on one side 'T', and the other 'R1', been told they may be fq 400 cams? thanks in advance!:smthumbup ,jonny im sure this has been coverd but i can...
  11. Private Sales - Parts
    Brand new in box set of HKS cams, 264/272, intake/exhaust. Firm on 250 UK Pounds, plus postage.
1-11 of 12 Results