Lancer Register Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Technical Questions
    My evo 6 (173.xxx kms) drives normally when I drive calm. But when I give it WOT it boosts to 1.3 bar (peak) then starts jolting heavily and boost drops to 0.8 bar. I'm running a evo 8 turbo. Things I have already changed: BOV: evo 8 MR fitted Wastegate actuator: Evo 8 fitted with appropiate...
  2. Private Sales - Parts
    Factory Lamco/Mitsubishi DIN Gauge Set All Gauges work and in perfect condition as is the DIN panel. No Scratches or Hazing of the glass or Bezels. No Sensors or harness Im afraid. Price: SOLD - Local Buyer Item Located in Vancouver, Canada.
  3. Private Sales - Parts
    Now sold. For sale is a GrimmSpeed 3 port boost solenoid for Mitsubishi EVO 8/9, unsure about 7 as it's not stated on the box. This is brand new and has only been opened to check the contents. The reason for sale is that I've opted to use a different brand for when my car gets tuned. Price...
  4. Wanted
    http://justjap.com/sri-carbon-fibre-pillar-gauge-holder-mitsubishi-evo-ct9a.html This is a carbon pod for just one 60mm gauge, I currently have a product like this that was custom made but the quality of the carbon is poor, I've since found this for sale in AUS, how ever they won't ship to the...
  5. Engine / Turbo
    :handsup:Hi, I have an evo4, with a full evo7 set up and aftermarket management, running stock waste gate boost (0.6-0.8 bar) I was advised not to turn turn boost up as I have the habit of braking engines ( this being nr5), should I, meth kit, nos,cams, head work, ? Iv got 255pump, hks exhaust...
  6. Engine / Turbo
    So I recently replaced my wastegate on my car along with some vacuum lines, and to what I believe is that I accidently got rid of the Boost Pill in the vacuum line going to the compressor housing. Some people mention it to me as I was asking around to why I am not able to make stock boost...
  7. Engine / Turbo
    Got a 7 RS turbo fitted to my V to replace the one at the end of it's life. However it seems to take a lot longer to come on full boost than my old V turbo. It now seems to be over 4250rpm by the time it reaches full boost. I'm sure my old turbo was on full boost at 3500rpm. It's making the...
  8. Engine / Turbo
    I'm new to this so go easy ha. So when I put my foot down and I hit the turbo the revs go up abit then the turbo kicks it. 'Late compared to when it should' I've check all the hoses for leaks and checked all the clamps but all fine from what I could see/feel could this be todo with the...
  9. Non-Evo Cars for Sale
    2000 Nissan Silvia S15 43,000 miles (almost) Tax 31 July 2014 MOT August 2014 Pewter Grey Service History North Staffordshire Due to possible family circumstances ive got to put her up for sale. I don't really want to but unless things change ive got to cover expenses. Imported by JM Imports...
  10. Private Sales - Parts
    Hi guys. Here I'm selling this boost controller, it is a genuine EVC5 Black limited, with all wiring BUT NO SOLENOID sadly. It is fully working, and in nice cosmetic condition, note that it was fitted with sticky pads. Quite clever device, can be used in any turbocharged car. When complete...
  11. Engine / Turbo
    Was happily cruising round town and as I came out of a rounda bout I noticed serious lack of power and realized the boost was gone, I've got a hks blow off valve and normally can hear it and now it is silent, so ive checked all the lines and found a slightly leakey itercooler pipe which ha...
  12. Technical Questions
    Whats up guys, Just got my evo 8 like a week ago. Car runs fine the only problem is it wont pull after 4500-5000 rpms! It builds boost at 3000 and stops pulling at 5000. I'm running stock Boost. Not sure what could be causing. My guesses are 1.Boost Leak...maybe 2.Bad MAF Sensor...maybe...
  13. Private Sales - Parts
    ************* SOLD **************** Hi, for sale a brand new Apexi AVC-r Boost controller with all associated parts, loom etc. The box has been opened to check all is there but that's all. Colour: Silver Prices: £460 delivered if paid by Paypal as a gift, money transfer or cheque (cheque...
  14. Technical Questions
    I have owned my car for two years now and I have been slowly making upgrades. I want to list what my mods are in hopes someone can point me on the right direction regarding how much boost and if I should have something else done. I have no unrealistic expectations about numbers but it would be...
  15. Technical Questions
    i recently had a Gizzmo boost controller fitted. I have set this up at: duty=55 and the gain=15 giving me 1.23 measurable pressure when puttin my foot down in 3rd and 4th. Overboost is set to 1.38. I just wanted to know what the standard boost is for the 260 and what is a safe level to take the...
  16. Wanted
    Anyone got a spare electronic sender for a turbo boost gauge that they don't need? Mine has packed in and the boost gauge now reads -1.0 all the time :(
  17. Technical Questions
    Hi all, Need some help. There are many threads similar to this but none seem to get to the point. Not long had my evo 4 & today set up apexi boost controller with a mate who knows how. Set low boost (at 1 bar) without any problems. When we tried to set up the high boost, at around 1.2 bar a...
  18. Technical Questions
    Hi all, Need some help. There are many threads similar to this but none seem to get to the point. Not long had my evo 4 & today set up apexi boost controller with a mate who knows how. Set low boost (at 1 bar) without any problems. When we tried to set up the high boost, at around 1.2 bar a...
  19. Technical Questions
    Car parked for 3 years, full ralliart services, driving perfectly before parked up, fuel line leak never got round to fix. Took to ralliart on trailer (not started), 72k service done, new brake lines, corroded fuel lines from tank to rear door area renewed with aeroquip, new filler neck (fuel...
1-20 of 20 Results
Top