No ignition reading! - Mitsubishi Lancer Register Forum

Go Back   Mitsubishi Lancer Register Forum > Technical > ECU / Mapping

Thread Tools Rate Thread Display Modes
Old 25-10-2014, 10:15   #1
Registered User
Join Date: Dec 2009
Posts: 292
No ignition reading!

As I'm logging an evo 7 ECU, I don't get any ignition timing reading in evoscan while other parameters seem to read fine!
Ignition reads 5 all the time regardless of rpm & load, it doesn't change. The idle timing in the ignition table is 5, I changed it to -10 to see how it would affect idling & there was no effect, the cars idled perfectly fine, ignition reading always stuck at 5!
It seems that the car is unresponsive to ignition timing changes.
I'd appreciate your suggestions what to check for, wiring, ecu...etc
foxbat is offline   Reply With Quote
Sponsored Links

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 09:19.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.