Turbo change 10.5 hotside the same? - Mitsubishi Lancer Register Forum

Go Back   Mitsubishi Lancer Register Forum > Technical > Engine / Turbo

Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 10-06-2007, 09:59   #1
Join Date: Dec 2005
Posts: 8
Turbo change 10.5 hotside the same?

Looking to change the turbo on an 8MR.
Is the 10.5 hotside on the 8 MR the same as the IX one?
Would it just be a case of removing the clamp that holds the turbo core to the hotside, and swapping it for the IX core and compressor housing, while leaving the hotside still attached to the manifold and turbo elbow?
bigsnip is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 17:05.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.