Lancer Register Forum banner

Mitsubishi Evo 5

2K views 2 replies 2 participants last post by  ashalfie29 
#1 · (Edited)
Mitsubishi Evo 5 White.

Up for sale is my Evo 5.

Spec.
R-reg
Re-shelled And UK Registered
Forged engine
205b turbo
CP rods
ARP con rod bolts
Uprated injectors
Custom Manifold
Deatsch works fuel pump
Large front intercooler
Bov
De-Cat
Xtreme Twin plate clutch (usual noisy/rattly)
Bigger valves
Fully reconditioned ayc pump and braided hoses (recon by richard hart)
18inch weds alloys recently powder coated
Coilovers
Poly bushed
mishimoto slimline fan
Roll bars and front subframe powder coated.
Nardi steering wheel (removable)
NRG Boss (allows you to unclip the wheel)
Sat Nav
New front and rear Discs
New brake pads
One Piece headlamps
New front wing liners
Endless receipts for clips and other parts.

Print out showing 438bhp at the wheels.

At the end of 2017 i purchased a shell from jap performance.
All the parts were swapped over from my rotten evo to the new shell to get it rolling and driving.
The vehicle then went into c1-r and haunted them for a few months with loads of little jobs and an mot.
It will have a full mot on the vehicle before selling. Its done nearly 0 miles since the last one.
They also undersealed the vehicle front to back as in the images.
i have all the paperwork for this work carried out.
Whilst in c1-r they removed the sump and carried out a inspection on the engine and clarified in writing the engine spec which i have.
Also fitted and bled the recon ayc pump and all the fluids were changed throughout the vehicle.

I was building this for abit of fun on track days not for show.
It was a re-shell, not a ground up restoration using new parts and every nut and bolt replaced.
The shell was freshly painted.
There are a few items like the drivers seat is slightly worn, A chip here and there on the bonnet.
Its a solid, quick Evo5.

fresh 12months mot

£13000 offers

Any questions please ask.
Viewings are welcome. located in tamworth










 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top