Coilover/top mount possibly wrong match? - Mitsubishi Lancer Register Forum

Go Back   Mitsubishi Lancer Register Forum > Technical > Suspension / Handling

Thread Tools Rate Thread Display Modes
Old 26-03-2020, 12:09   #1
Senior User
madmatt's Avatar
Join Date: Oct 2016
Posts: 625
Coilover/top mount possibly wrong match?

Hi all,

I bought an aftermarket set of dampers for my Evo 6, however I have doubts that they might be for an Evo1-3. At the front, the green height below looks really small. Maybe 5mm. But the top mount bearing is maybe about 10mm. To me this won't fit properly. The bottom diameter is 15mm and the one just above it is 14.5mm so the top mount can only properly fit on the lower part which is only about 5mm tall.

And at the rear the small diameter shown by the green arrow doesn't look to match with the lower top mount bush.

Any thoughts?

Last edited by madmatt; 26-03-2020 at 12:12..
madmatt is offline   Reply With Quote
Sponsored Links

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 17:57.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.