Evo 5 GSR - @T_Selby94 - Page 2 - Mitsubishi Lancer Register Forum
 
 

Go Back   Mitsubishi Lancer Register Forum > General Stuff > Projects & Restorations

Reply
 
Thread Tools Rate Thread Display Modes
Old 28-09-2019, 10:22   #16
T_Selby94
User
 
Join Date: Aug 2018
Location: Lincolnshire
Car: Evo 5 GSR
My Car
Posts: 41
Little update, finally got around to putting the drive shaft in start of this week, abs sensor decided it wanted to be corroded and snap off , so had to drill it out, new sensors on its way

Thanks for all the comments
T_Selby94 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 13-10-2019, 20:51   #17
T_Selby94
User
 
Join Date: Aug 2018
Location: Lincolnshire
Car: Evo 5 GSR
My Car
Posts: 41
Another update abs sensor now on and shes now shut up in the workshop for winter for some more progress to be made. Had a strange ticking/rattling noise coming from the turbo, so off it came for a look over.

Have found some play in the wastegate which would be the answer to the noise. Also found some very slight play in the compressor wheel and turbine wheel along with some oil residue ! will be sending off in the next week or 2 for a full rebuild

Will have a nice fresh turbo for mapping whenever that will be ....
Attached Images
  

Last edited by T_Selby94; 13-10-2019 at 20:58..
T_Selby94 is offline   Reply With Quote
Old 22-10-2019, 22:11   #18
T_Selby94
User
 
Join Date: Aug 2018
Location: Lincolnshire
Car: Evo 5 GSR
My Car
Posts: 41
Nice delivery today, got the turbo back from midland turbo
Serviced, work on the wastegate flapper, new turbine wheel and compressor wheel, top job and didnt take as long as expected !
Attached Images
   
T_Selby94 is offline   Reply With Quote
Old 22-10-2019, 22:27   #19
H18BY0
... now with more Bang :)
 
H18BY0's Avatar
 
Join Date: Mar 2008
Location: Cider Country
Car: Slagged Red Evo 6 tme (ex 6 silver tme owner) & 95 white Astra Merit (auto :)
My Car
Posts: 16,898
Very nice - looks very, very clean but thankgod you removed the blue steering wheel!
__________________

:::::::::::::::::::::: Tommi Mäkinen ////////// Edition No.13 ::::::::::::::::::::::
_______________________________________________________________________
::::::::::::::::::::::::::::::::::::::::::::: Signed, stickered and decatted : ) v
H18BY0 is offline   Reply With Quote
The Following User Says Thank You to H18BY0 For This Useful Post:
T_Selby94 (27-10-2019)
Old 21-11-2019, 21:14   #20
T_Selby94
User
 
Join Date: Aug 2018
Location: Lincolnshire
Car: Evo 5 GSR
My Car
Posts: 41
Cool

Took the week off work this week and got myself over to the workshop to make some progress on the evo

Tubo is now back on, along with an m2 elbow and the m2 3" down pipe that i got a while back.

Got some new hoses for the recirc valve to replace the old slightly split ones and sprayed the fan whilst the rad was out, looks much better now in my opinion !

And of course fresh oil and filter and some fresh coolant

Soon be time for a map when it comes back out and the weathers better
Attached Images
      
T_Selby94 is offline   Reply With Quote
The Following User Says Thank You to T_Selby94 For This Useful Post:
Alex T (21-11-2019)
Old 31-12-2019, 15:57   #21
T_Selby94
User
 
Join Date: Aug 2018
Location: Lincolnshire
Car: Evo 5 GSR
My Car
Posts: 41
Another couple of little bits to add to the evo
Carbon cooling panel
And found some pics of the car when at auction back in japan so had a plate made up to match! JDM points

Oh, and happy new year
Attached Images
 
T_Selby94 is offline   Reply With Quote
The Following User Says Thank You to T_Selby94 For This Useful Post:
Stoff (31-12-2019)
Old 01-01-2020, 18:07   #22
vggevo6
Registered User
 
Join Date: Jan 2018
Location: Spain
Car: Mitsubishi Lancer Evo 6
Posts: 28
You have precious the EVO.

Happy New Year.
vggevo6 is offline   Reply With Quote
Old 18-01-2020, 21:42   #23
T_Selby94
User
 
Join Date: Aug 2018
Location: Lincolnshire
Car: Evo 5 GSR
My Car
Posts: 41
Went back over to the workshop today after a couple of months, fitted the carbon cooling plate and took it for a little spin around the block. Just waiting for the better weather now !

Need to get it booked in for mapping at somepoint and will be looking at getting a set of coilovers soon, torn between the meisters and bc's, thinking more meisters
Attached Images
  
T_Selby94 is offline   Reply With Quote
Old Yesterday, 11:34   #24
T_Selby94
User
 
Join Date: Aug 2018
Location: Lincolnshire
Car: Evo 5 GSR
My Car
Posts: 41
Picked the evo up from simon nortons yesterday after dropping it off their last weekend, serviced rear diff clutch packs, walbro 255, 3 port and simon worked his magic, along with pops and bangs on switch. Goes well and pops and bangs sound great
Attached Images
 
T_Selby94 is offline   Reply With Quote
Mitsubishi Lancer Register
Sponsored Links
Advertisement
 
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 23:59.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.