EVO 8 anti roll bar diameter - Mitsubishi Lancer Register Forum

Go Back   Mitsubishi Lancer Register Forum > Technical > Suspension / Handling

Thread Tools Rate Thread Display Modes
Old 06-09-2020, 16:09   #1
Registered User
Join Date: Jun 2019
Posts: 22
EVO 8 anti roll bar diameter

Hi from France, what anti roll bar diameter do you recommend me to run on my Evo 8 for only road tarmac use (no trackday) ?
I'm going to fit Ohlins R4 shock, 50 N/mm front ; 60 N/mm rear

EVO8ARD is offline   Reply With Quote
Sponsored Links
Old 11-09-2020, 16:21   #2
Senior User
Join Date: Apr 2004
My Car
Posts: 245
I see people use rear whiteline 24 mm and I use 25 mm Perrin with uprated mounts that come with the bar. Uprated roll bar end links that use spherical bearings such as whiteline etc [iirc] a good idea. I am limited by traffic and police where I live but after a 1 hour drive just now and trying to make the car misbehave occasionally, roll was not a problem [for me with my use].
I have oe springs/ bilsteins, oe front roll bar, 6 degrees caster, perrin 25 mm rear arb with whiteline end links at front, whiteline RCK at the front [which apparently also reduces roll at the front amongst other things], yoko a052 tyres.
sfg is offline   Reply With Quote
Mitsubishi Lancer Register
Sponsored Links

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 22:52.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.