9.5 ET30 will fit but you will need spacers on the front (10mm likely) so they clear the brembos, alternatively get ET30 rears and ET20 fronts, this will clear ok.
If you have aftermarket brakes this might not be an issue.
at 9.5 depending on the tyre you fit (usual is 245/40/18) it will rub the plastic lining on full lock
you could re-mould the lining or try a lower profile tyre
Iv got 18 x 8.5’’ with 245 40 tyres et 35 on my 6, it’s on Ohlins and not very low, it just catches the front arches on full lock but will depend how much camber you run, the rears just scrub slightly under hard compression, I think I will try 245 35s next which should solve all the scrubbing, hope that helps
18x9, et30, 235 40 18 tyres, 10mil spacers on front to clear Brembos, 10mil spacers on rear to compliment the fronts, perfect fit.
18x9.5 too big.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Lancer Register Forum
5.7M posts
86.4K members
Since 1999
A forum community dedicated to Mitsubishi Lancer owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!