Lancer Register Forum banner

Suspension - what Evo model suspension fits TME

2K views 10 replies 6 participants last post by  TMEEMT 
#1 ·
Just wondered if anyone can advise - what other Evo models can have suspension transferred onto a TME as a factory fit?

And would those models suspension perform the same ie does the TME have different damping etc

Want to put ‘factory’ shocks back on instead of coilovers.

Many thanks


Sent from my iPhone using Tapatalk
 
#8 ·
think it's not the same for Evo 5 or 6 or TME... it fit but different factory option

if you put a GSR 5 VIN in Partsouq and check the ref for the front suspension spring,
it give MB856411

if you make the same thing with my TME RS VIN, I have MR510097 as result...

so i think it's not the same.

on partsouq (again...) you can find that


which show that there is different options (I think) for suspensions?

(but the ref aren't the same that MR510097 found on the other page on partsouq...)

I think it's difficult to find what was put on the car in factory if you don't have the original parts under your eyes...

Good luck
 
#9 · (Edited)
There were some different part numbers for different colour springs.

Front Spring - MR510096 (white/green)
Front Spring - MR491340 (yellow/blue)
Front Spring - MR510097 (white/white)
Front Spring - MB856411 (yellow/green)
Front Spring - MB856412 (yellow/white)

How many are still in production and if there is any difference in spring rate though, you might wanna phone Ross Sport and ask.
The spring they list is Front Spring - MR510096 £117
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top