Lancer Register Forum banner

Boost issues

424 views 1 reply 2 participants last post by  Dan ep3 turbo 
#1 ·
Fitted the new intake today and it was running absolutely lovely for a good hour or so, and then I turned it off and gave it a good wash, went to take some photos and go for a drive and it just has absolutely no power at all, you can hear the turbo spooling but it sounds really high pitched, I’ve checked all the vac hoses and the boost pipes and it all looks ok as far as I can see

Any ideas?




Sent from my iPhone using Tapatalk
 
#2 ·
Fitted the new intake today and it was running absolutely lovely for a good hour or so, and then I turned it off and gave it a good wash, went to take some photos and go for a drive and it just has absolutely no power at all, you can hear the turbo spooling but it sounds really high pitched, I've checked all the vac hoses and the boost pipes and it all looks ok as far as I can see

Any ideas?

Sent from my iPhone using Tapatalk
Block turbo inlet off and fill system with compressed air.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top