Evo Drive By Wire Conversion Kits

[Track Formula]

We offer a few kits to install the Evo 10 electronic pedal for these applications.

The main advantages with moving to a drive by wire setup come when the vehicle has advanced electronics added to it and you want to take more control over some features such as idle and throttle control over different conditions. You can also acheive blip on downshift if you have paddle shift.

Each kit is supplied with the bracket, stainless hardware, a new throttle stop and a new connector, terminals and wire seals. On the right hand drive Evo 7,8,9 kit the mounting setup also covers the old hole in the bulkhead where the cable used to go through.

Evo 7,8,9 Left Hand Drive
Evo 7,8,9 Right Hand Drive
Evo 5,6 Right Hand Drive - coming soon, estimated 1-2 weeks

Use this link to view the section in our shop - https://trackformula.co.uk/product-c...re-conversion/

Example pictures. PLEASE NOTE: The metal cover from the pedal is missing in some of these pictures. The Evo 10 pedal has a cover on it with makes it a nice option to use.

Evo 7,8,9 Left Hand Drive



Evo 7,8,9 Right Hand Drive



Evo 5,6 Right Hand Drive

[RichW]

Interesting - so could cruise control be a possibility with an Evo 6 if the ECU was also changed??

[Track Formula]

Originally Posted by RichW

Interesting - so could cruise control be a possibility with an Evo 6 if the ECU was also changed??

You would be best discussing this with whoever calibrates the required ecu. It’s not something I’ve dealt with.

[Rampant]

Originally Posted by RichW

Interesting - so could cruise control be a possibility with an Evo 6 if the ECU was also changed??

The answer would normally be a yes - but I think it might require either an ECU that has the cruise control built in or else an external module that can be wired in.

Cheerz

Mark H

[river evo 6]

Originally Posted by RichW

Interesting - so could cruise control be a possibility with an Evo 6 if the ECU was also changed??

Cruising in an evo. Why

[RichW]

Originally Posted by river evo 6

Cruising in an evo. Why

Nightmare at times trying to keep below the legal limit as i am sure you are aware

[dreMR]

Can you not get blip on downshift with gearstick?

[Track Formula]

Originally Posted by dreMR

Can you not get blip on downshift with gearstick?

Yes, you can with the stick with a suitable load cell. I'm not saying paddles are the only way this is possible. There are applications where a stick is fine and possibly a preference but in my mentioning about drive by wire and what it can do I highlight that it can control blip on downshift with a paddle request since some people are still learning about these processes. There are other controls available which aren't with cable hence why you see so many advanced setups with drive by wire. Some people will greatly benefit from it, some may not.