Mitsubishi Lancer Register Forum - View Single Post - Evo 10 OBDII fault codes
View Single Post
Old 15-01-2018, 18:40   #5
stu8
Senior User
 
stu8's Avatar
 
Join Date: Aug 2003
Location: Southport
Car: Evo V - geekmapped.com
My Car
Posts: 21,896
DTC Codes – Misc:
P1021 Intake Engine Oil Control Valve Circuit
P1025 Exhaust Engine Oil Control Valve Circuit
P1231 Active Stability Control Plausibility
P1232 Fail Safe System
P1233 Throttle Position Sensor (Main) Plausibility
P1234 Throttle Position Sensor (Sub) Plausibility
P1235 Mass Airflow Sensor Plausibility
P1236 A/D Converter
P1237 Accelerator Pedal Position Sensor Plausibility
P1238 Mass Airflow Sensor Plausibility (Torque Monitor)
P1239 Engine RPM Plausibility
P1240 Ignition Angle
P1241 Torque Monitor
P1242 Fail Safe Control Monitor
P1243 Inquiry/Response Error
P1244 RAM Test For All Area
P1245 Cycle RAM Test (Engine)
P1247 TC-SST Plausibility <TC-SST>
P1320 Ignition Timing Retard Insufficient
P1506 Idle Control System RPM Lower Than Expected at Low Temperature
P1507 Idle Control System RPM Higher Than Expected at Low Temperature
P1590 TCM to ECM Communication Error in Torque Reduction Request <TC-SST>
P1603 Battery Backup Circuit Malfunction
P1676 Variant Coding
P2066 Fuel Level Sensor (Sub) Circuit Range/Performance
P2100 Throttle Actuator Control Motor Circuit (Open)
P2101 Trottle Actuator Control Motor Magneto Malfunction
P2122 Accelerator Pedal Position Sensor (Main) Circuit Low Input
P2123 Accelerator Pedal Position Sensor (Main) Circuit High Input
P2127 Accelerator Pedal Position Sensor (Sub) Circuit Low Input
P2128 Accelerator Pedal Position Sensor (Sub) Circuit High Input
P2135 Throttle Position Sensor (Main and Sub) Range/Performance Problem
P2138 Accelerator Pedal Position Sensor (Main and Sub) Range/Performance Problem
P2195 Heated Oxygen Sensor (Front) Inactive
P2228 Barometric Pressure Circuit Low Input
P2229 Barometric Pressure Circuit High Input
P2252 Heated Oxygen Sensor Offset Circuit Low Voltage
P2253 Heated Oxygen Sensor Offset Circuit High Voltage
P2263 Intake Charge System Malfunction
U0001 Bus Off
U0101 TC-SST-ECU Time-Out <TC-SST>
U0121 ASC-ECU Time-Out
U0141 ETACS-ECU Time-Out
U0167 Immobilizer Communication Error
U1180 Combination Meter Time-Out

A few more:

Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
P0841: Clutch 1 pressure sensor system (Poor performance)•
P0842: Clutch 1 pressure sensor system (Output low range out)•
P0843: Clutch 1 pressure sensor system (Output high range out)•
P0846: Clutch 2 pressure sensor system (Poor performance)•
P0847: Clutch 2 pressure sensor system (Output low range out)•
P0848: Clutch 2 pressure sensor system (Output high range out)•
P185D: Clutch open not possible•
U0001: Bus off•
U0100: Engine time-out error•
P1803: Shift lever system (CAN or LIN time-out error)•
P1871: APS system (Signal abnormality)•
P1872: Between shift lever and TC-SST system (Q-A function abnormality)•
Sensor (The sensor below is determined to be normal)
Clutch 1 pressure sensor•
Clutch 2 pressure sensor•
APS•

Shift lever-ECU•

(all codes in this thread are copied from other resources so please do your own checks)

Stu
__________________
CPP Motor Developments -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

RG Motorsport -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by stu8; 24-06-2018 at 12:45..
stu8 is offline   Reply With Quote