Lancer Register Forum banner

Mitsubishi Genuine Parts

394K views 3K replies 418 participants last post by  Ross W 
#1 · (Edited)
A lot of our customers aren't aware that Ross sport can offer a very comprehensive range in standard Mitsubishi parts.

With more and more customers wanting to restore and maintain their Evos to a high standard, we have been doing more and more of this.

Several years ago we bought all of the old standard parts stock from Ralliart WRC Team. They had a huge stock of parts that was used for maintaining the recce cars which were standard Evo 8's at the time, more recently we have taken delivery of all the Ex JRM and ADR motorsport standard Mitsubishi parts inventory.
We stock all kinds of standard bits from nuts and bolts right through to suspension arms, diffs, turbochargers, body panels, etc.

We have full access to the mitsi parts database. Between myself and Gavin we know the system inside out! So there's nothing we cant look up, and give you a price on within a few seconds on Evo 4-10 :smthumbup Nothing is too much trouble, so even if its just a clip or a screw you need give us a shout.

Feel free to add part number / price requests to the thread.

We have all OEM parts on our website: www.rosssport.com

You can search for part numbers & the PNC numbers of the diagrams commonly found online. - (If the PNC number you are seaching for starts with a zero and it doesn't come up, try researching it with out the zero. e.g PNC number is 01156B, search for 1156B.

You can also get some healthy discounts using this promo code at checkout: MLROEM10


 
See less See more
1
#2,422 ·
#2,426 ·
Hi,

I'm after the NSR arch liner for an X.
I think it is this part:
https://www.rosssport.com/Brands/Mitsubishi-OEM-Parts/Shield-RR-wheel-splash-LH-MIT5370A387
And also the 4 plugs/clips that plug into the edge of the rear arch. 2 on each side.
Which I think are:
https://www.rosssport.com/Brands/Mitsubishi-OEM-Parts/Clip-MITMU001311

Could you confirm I've got the right parts please and a price?

Cheers,
Chris
5370A387, thats the lower part only of the arch liner, did you need that part of the whole liner?

And this is what the MU001311 looks like

https://partsouq.com/ru/search/all?q=MU001311
 
#2,436 ·
Is it possible to get the retaining clips and bolts for the Evo X front disc bells?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top