OEM Boost controller [Archive] - Mitsubishi Lancer Register Forum

OEM Boost controller

Mita
02-08-2014, 22:11
Anybody know what the max boost these are happy with before you need a 3 port???? :smthumbup

Lee5
02-08-2014, 22:13
They will only run the max boost they are running on the car, the duty cycles are set at 100%, so will not run more boost

If you want to run more boost just run a 3 port.

Lee

Mita
02-08-2014, 22:14
Thanks Lee :)

Mita
03-08-2014, 01:35
Is a 3 port plug and play ? Or do you have to cut and join wires??

sbn1979
03-08-2014, 06:37
On what Evo ?

CkoTuHa
03-08-2014, 09:27
take a look at the Technical Instruction Manual. You will find the solenoid, its connector and its ports. Replacing a stock solenoid with any three port is really not an issue. The trouble is you will have to adjust the duty levels of it in the ecu. So, this entails remapping which also requires at least a wideband oxygen sensor for maf based ecu.

Mita
03-08-2014, 09:38
Sorry its a 5.. Yeh remap will happen, as I need to map to uk fuel and exhaust.