Upgrading Firmware on Hydra nemisis [Archive] - Mitsubishi Lancer Register Forum

Upgrading Firmware on Hydra nemisis

martinw
31-07-2009, 09:16
just a quicky, i know the daddy of Hydra is Richard Bulmer but i also know he is very busy at present:wallbang: Having problems at the moment with the Hydra ECU now fully allowing Matt at The Racing Line to make adjestments to the MIVEC.

apparantly the hydra that i have got has older firmware/sofware and an upgrade would do the fix, rather than send my hydra to mr bulmer does anybody on here have any help they may be able to offer me;)

martin

31-07-2009, 09:51
Firmware update as far as I know need to be done by Rich I think.

martinw
31-07-2009, 10:00
i thought so:wallbang:

JamieL
31-07-2009, 10:38
Is it not possible to email the upgrade to Matt

31-07-2009, 10:53
Needs special kit to do it, I just spoke to Rich to confirm he is trying to get Hydra to send him the kit

martinw
31-07-2009, 11:01
its something really sily like matt only has a parameter of 15% wher he knows he could push to 50% with the correct firmware and this is making the lag worse than it could be, he wil not rest until he has managed to get the performance wher he knows he can take it.

bloddy clever stuff all this mapping:confused:

31-07-2009, 11:01
Is your box blue and silver?

martinw
31-07-2009, 11:07
i beg your pardon ant...........................:crackup:

yes mate! these are photos and serial number of the actual one mate, ssems trage as is off a proper IX so would have thought it would have had good usability for the MIVEC

https://www.lancerregister.com/showthread.php?t=239666&highlight=hydra

31-07-2009, 11:10
i beg your pardon ant...........................:crackup:

yes mate! these are photos and serial number of the actual one mate, ssems trage as is off a proper IX so would have thought it would have had good usability for the MIVEC

https://www.lancerregister.com/showthread.php?t=239666&highlight=hydra

lol may be worth giving Rich a bell see what he can do :)