Evo X 330 SST ecu [Archive] - Mitsubishi Lancer Register Forum

Evo X 330 SST ecu

Wheels
20-04-2009, 20:53
Will the new uprated 330 vers. of the X have a remapped ecutech upgrade to the ecu or will they piggyback a chip on as they did in the past?

I have seen info today that says it will have a new exhaust inc downpipe (so i guess thats the standard FQ360 HKS unit) then a HKS racing suction kit and of course the HKS hardpipe kit as well as ECU upgrade.

Just wondered which way you think they will get the remap.

Oh and also the removal of the torque limiter in 1st gear to aid with launches!!!

they must be getting confident of the g/box now.
:mhihi:

cossie1
20-04-2009, 20:56
They will ecutek it mate

grayw
21-04-2009, 05:54
There are a couple of dealer flashes available in the US available for the SST, although not power orientated they do help with the abysmal fuel consumption.
Have you check if the 330 has more torque than the 300 also:)

Wheels
21-04-2009, 20:36
Yep checked...dealer email states power from 295bhp up to 329bhp and torque from 300lb.ft up to 322 lb.ft.

0-60 goes from 4.7secs down to 4.4secs,

MarkM
21-04-2009, 20:55
Yep checked...dealer email states power from 295bhp up to 329bhp and torque from 300lb.ft up to 322 lb.ft.

0-60 goes from 4.7secs down to 4.4secs,


Mate, can you help me with something? On a manual UK car, the fog light grille areas, drivers side is an open mesh, passenger side is closed up 'mesh look'.........does the SST have open mesh on the passenger side for the box cooler? I'd like to have symmetry and maybe some more cooling for my induction kit :)

MotoIntrest
22-04-2009, 12:20
Mate, can you help me with something? On a manual UK car, the fog light grille areas, drivers side is an open mesh, passenger side is closed up 'mesh look'.........does the SST have open mesh on the passenger side for the box cooler? I'd like to have symmetry and maybe some more cooling for my induction kit :)

yep sst has open mesh on this side for the tranmission oil cooler :smthumbup

MarkM
22-04-2009, 17:16
yep sst has open mesh on this side for the tranmission oil cooler :smthumbup
sweet, thanks a lot, next on the list then :mhihi: