Double DIN, Heater control relocation [Archive] - Mitsubishi Lancer Register Forum

Double DIN, Heater control relocation

nads1978
18-01-2009, 09:14
Below is my dashboard on the VII GTA.
Underneath is a dashboard with a double DIN and heater controls in the lower position.

Can I achieve this?
a) What parts would I need? - Obviously a double din fascia.
b) From what model of car?
c) Is it 'plug and play?'
http://i342.photobucket.com/albums/o428/nads1978/dinandheater-mine.jpg

http://i342.photobucket.com/albums/o428/nads1978/din-double.jpg

Thanks in advance.

Big Jim
18-01-2009, 11:27
Not exactly what you are after but it might help.....

Radio relocation kit (http://forums.evolutionm.net/evo-how-tos-installations/260037-install-radio-relocation-kit.html)

HTH

Jim

rsjohn
18-01-2009, 11:40
you need to get the bits from an evo 7 as connection on heater controls from evo8/9 are different.
its litterally a 10 min job to do as i did mine.

you need, double din facia, new heater controls the 4 long screws, 4 plastic extenders and the cover trim for controls.

nads1978
18-01-2009, 13:53
Not exactly what you are after but it might help.....

Radio relocation kit (http://forums.evolutionm.net/evo-how-tos-installations/260037-install-radio-relocation-kit.html)

HTH

Jim

Brilliant - gives me another option, actually!

you need to get the bits from an evo 7 as connection on heater controls from evo8/9 are different.
its litterally a 10 min job to do as i did mine.

you need, double din facia, new heater controls the 4 long screws, 4 plastic extenders and the cover trim for controls.

Thanks for the parts list, - good job you mentioned the 8/9 being different.


Cheers guys:smthumbup