Evo X ECU - pinouts [Archive] - Mitsubishi Lancer Register Forum

Evo X ECU - pinouts

26-03-2008, 20:41

Had a little browse today and "borrowed" ;) this from a US site :) There will be some variations on the JDM(UK) models, probably only a lack of 2nd Lambda and fuel tank pressure and temperature

Other comments include;

MAF is, I think, a "hot wire" type :confused:

2 IAT (inlet air temp) sensors. One integral to the MAF the other hopefully in the plenum

Fly/Drive by wire throttle - 6 wires to both the pedal and throttle body :eek:

CAN :mad: - see later

No existing aftermarket Evo ECU will work on the X, let alone connect :goingmad:

GEMS are suggesting their ECU is comming soon


See attached .pdf

26-03-2008, 20:44
ECU pic and CAN configuration pic to follow - sometime :mad::mad:

26-03-2008, 21:04
Hopefully you can get it uploaded soon.

29-03-2008, 09:11
Hopefully you can get it uploaded soon.

Uploaded, pics to follow :)