ecutek maps [Archive] - Mitsubishi Lancer Register Forum

ecutek maps

adam bell
24-03-2008, 17:55
i bought my evo 5 a few weeks ago now and it came with the ecutek remap on it and a boost controller.
i had a power run done on the car at a rolling road day and got 351/354 atf at 1.45 bar boost.
i am happy with these results but allways wanted to get nearer 400/400 or there abouts,a recent thread i started about this said i need evo 8 mr cams and 3"elbow and down pipe i have 2.5" at the moment and 3"cat back with decat pipe.
if i done it in stages and got the cams first i would need to remap it to get the benifit of the new cams.
what sort of price would it be to get the map sorted out and would i have to take it to the people who done the original ecutek as this would be a long way for me to travel

any help is great and any other things i might need would be a great help.:smthumbup

D11 CYA
24-03-2008, 18:01
im sure you wil need a bigger turbo to...

if the people that did the first map didnt lock the ecu or if they give u code to unlock it u wont have a problem with someone else remappin it

adam bell
24-03-2008, 18:06
i hope they do as i think it was done up in west yorkshire and i am in oxford

Barry P.
24-03-2008, 18:09
You will also need forged rods as they are likely to come through the block at 400lbft of torque !

Stallion
24-03-2008, 18:28
You will also need forged rods as they are likely to come through the block at 400lbft of torque !


:nod: Yes you will need to spend a bit to get 400/400 (fully forged)

grayw
24-03-2008, 18:30
The ECU can be remapped by any ECUTEK dealer, but you still have to pay a mapping fee, but not the ECUTEK license fee.

The cams are one of the limiting factors, but your best off talking to whoever your going to take the car to for the remap. They will advise you of what they expect/will achieve, while keeping your engine safe.

staffi
24-03-2008, 18:39
im sure you wil need a bigger turbo to...

if the people that did the first map didnt lock the ecu or if they give u code to unlock it u wont have a problem with someone else remappin it


Ecutek can be remapped..:smthumbup:smthumbup

tony66
24-03-2008, 23:36
what about the norris steel rod package and get some 272s or similar fitted while the head is off,avcr and a re-map maybe later turbo off a 9gt
gotta be knocking on the door of 400 reliable[cheapish] bhp with that lot.:smthumbup

Dave-Cee
24-03-2008, 23:40
400/400 + 4k if it goes bang?

tony66
24-03-2008, 23:42
400/400 + 4k if it goes bang?
lol!

adam bell
25-03-2008, 07:58
so i am looking at about 4k to do what i need then.
or could it get done for less

tony66
25-03-2008, 12:44
the norris con rod job was about a grand,2nd hand avcr 200,2nd hand cams 300-turbo 500-max and we probably dont even touch 2k yet.
unless you buy everything brand new...:blah:

adam bell
25-03-2008, 12:48
i dont need the avcr as i have a hks evc controller.
been offered some cams from a 8mr for 210

tony66
25-03-2008, 16:01
better with hks 272 similar price dont need springs either,more aggressive
a lot of people dont bother with the rods-some get away with it
some dont.