Go Back   Mitsubishi Lancer Register Forum > General Stuff > Projects & Restorations

Reply
 
Thread Tools Rate Thread Display Modes
Old 29-01-2017, 20:39   #31
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
Quote:
Originally Posted by Uncle Winnet View Post
looks nice can i ask how much the lift was how do u find it for woking on the car
The ramp was £2200 delivered once I got the oil an isolator and a couple of other bits.

I could have got a cheaper one but wanted one that doesnít have any supporting posts between the two platforms as it makes it easier for dropping the prop, exhaust etc.

itís only a four foot lift but Iím still able to get underneath and get at everything and it turns things like dropping the oil into a half hour job
infamous pa is online now   Reply With Quote
Old 12-02-2017, 22:58   #32
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
Well with the weeks now flown by since my last post I thought id best update the thread.

Not that there's much to report as I've not had a huge amount of time available to get stuck in but I've now got it to a point where it can sit until I tackle the mucky job of stripping off the dreaded Waxoyl.

There were still plenty of bit's to take off on my return but there all stowed away now and we're are ready to go

Name:  2WjTYM.jpg
Views: 592
Size:  228.9 KB

Name:  5p9yQa.jpg
Views: 589
Size:  244.6 KB

Its been like Christmas all over again with all the parcels turning up over the last week but there all for a good course.

The other half kindly treated me to a rotisserie last year before all this started and I've managed to get it set up and trialled it over the weekend.

Name:  x1XPk4.jpg
Views: 588
Size:  231.0 KB

Name:  qP7FMR.jpg
Views: 586
Size:  216.4 KB

Name:  XMWcn8.jpg
Views: 590
Size:  205.6 KB

Name:  q1E0Jp.jpg
Views: 588
Size:  207.1 KB

What a pleasure it is to work with and I'm sure it will make working on the underside a breeze.

I've got some broken bolts to remove that I'm going to get out before the pain staking process of removing wax begins

Last edited by infamous pa; 12-02-2017 at 23:00..
infamous pa is online now   Reply With Quote
The Following 4 Users Say Thank You to infamous pa For This Useful Post:
evolover21 (13-02-2017), jerra (15-02-2017), M3 ROB (13-02-2017), madmatt (14-02-2017)
Old 13-02-2017, 19:10   #33
Red Rooster
Senior User
 
Red Rooster's Avatar
 
Join Date: May 2011
Location: Whaplode
Car: In a million bits !
My Car
Posts: 549
Ideal bit of kit

Should make the job a whole lot easier , nice progress so far
Red Rooster is offline   Reply With Quote
Old 02-03-2017, 20:56   #34
k13 asj
Senior User
 
Join Date: Aug 2012
My Car
Posts: 404
Looking good so far phil... i'll be keeping upto date on this one!
k13 asj is offline   Reply With Quote
Old 02-03-2017, 21:10   #35
adwo
Senior User
 
adwo's Avatar
 
Join Date: Apr 2008
Car: Evo 6 RS, Proflex Evo 2, Movit 342 front brakes, more tastefull mods!
My Car
Posts: 994
Hire someone with a dry ice machine to have the underside cleaned up in a couple of hours..

HTH,

Adwo


Verzonden vanaf mijn iPad met Tapatalk
adwo is offline   Reply With Quote
Old 20-03-2017, 23:45   #36
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
I'm nearly ready to start applying the rust bullet but I would like to know what people found to be the best proses of doing so.

I've almost got it all back to bare steel and once completed I was going to key up the steel to give it a good base to stick too.

Looking at Rustbullets website my best understanding of the proses is as follows.

Apply one coat of Rust Bullet Automotive, give it 2-3 hours curing time then apply the seam sealer followed by the next two coats 3-4 hours apart then leave it over night before finishing it off with the Dinitrol 447 stone guard in the morning.

How have other people done this or does the above sound about right ?

Thanks in advance
infamous pa is online now   Reply With Quote
Old 22-03-2017, 17:16   #37
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
It's about time for an update as there's been a bit of progress in the stripping.

I've been drilling out the broken bolts and tapping them out ready for the new bolts when it all goes back together thankfully they all came out fairly easily and the original threads were in good condition.

Name:  Cz5KTb.jpg
Views: 293
Size:  189.1 KB
Name:  VmG44D.jpg
Views: 294
Size:  273.2 KB
Name:  urmyzR.jpg
Views: 291
Size:  151.1 KB

The under body is almost done with just the rear arches to finish and the engine bay to do (I can safely say its been the dirtiest me and my garage has ever been)I've still got some of the little nooks and crannies to do which will probably take longer than you could ever anticipate but it will keep me up at night if its not perfect.

I'm going to key up all of the under body in prep for the Rust Bullet to give it a good base to stick too so I'm a little while off painting yet but this is how it stands today.

Name:  XF2Coo.jpg
Views: 295
Size:  250.3 KB
Name:  8ZuBL9.jpg
Views: 296
Size:  218.8 KB
Name:  NvCo7f.jpg
Views: 299
Size:  229.8 KB
infamous pa is online now   Reply With Quote
Old 22-03-2017, 17:41   #38
Simon350S
Senior User
 
Join Date: Oct 2016
Posts: 223
Nice work
Simon350S is offline   Reply With Quote
Old 22-03-2017, 17:56   #39
G-Force
Senior User
 
Join Date: Dec 2012
My Car
Posts: 659
Great work thus far. Keep the updates coming.
G-Force is offline   Reply With Quote
Old 24-03-2017, 00:10   #40
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
Quick update in regards to today's little job, that's the front and rear screen's removed, still in one piece and all good to go back in once needed.

Name:  sbAZ3k.jpg
Views: 235
Size:  215.8 KB
Name:  juPVu7.jpg
Views: 236
Size:  244.8 KB

Quite thankful TBH as there the factory windows and etched with the logos and didn't fancy replacing them.
infamous pa is online now   Reply With Quote
Old 17-05-2017, 16:21   #41
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
well I can honestly say stripping the under body seal and stone chip is a mind numbing operation that never seams to end its as if it breads out of all the little corners but I've finished stripping and all I need to do now is panel wipe everything down and mask up ready for the Rust bullet

Name:  hUoxES.jpg
Views: 116
Size:  131.4 KB

Name:  npe5HH.jpg
Views: 118
Size:  223.1 KB

Name:  Y73n7I.jpg
Views: 117
Size:  253.5 KB

Name:  Uv2JAQ.jpg
Views: 117
Size:  127.3 KB

Name:  SMdo2w.jpg
Views: 119
Size:  210.9 KB

Name:  cjkEII.jpg
Views: 118
Size:  115.4 KB
infamous pa is online now   Reply With Quote
Old 17-05-2017, 16:25   #42
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
Name:  HYdonf.jpg
Views: 118
Size:  246.1 KB

Name:  YYETrl.jpg
Views: 115
Size:  280.2 KB

Name:  Qbtyzc.jpg
Views: 117
Size:  239.6 KB

Name:  nLZRlP.jpg
Views: 116
Size:  184.3 KB

Name:  LmDEC0.jpg
Views: 114
Size:  248.8 KB

Name:  mwaHNC.jpg
Views: 114
Size:  256.3 KB
infamous pa is online now   Reply With Quote
Old 17-05-2017, 16:46   #43
MikeC
Senior User
 
MikeC's Avatar
 
Join Date: Apr 2006
Location: Behind a Momo wheel
Car: Evo IXGT
Posts: 2,628
Awesome, not sure how I missed this one. Makes my little refresh seem like childs play. Looking forward to seeing more updates as I may tackle the underside on mine come winter time, maybe.
MikeC is online now   Reply With Quote
Old 17-05-2017, 23:42   #44
infamous pa
Senior User
 
Join Date: Mar 2009
Location: Norwich
Car: Evo 6 tme
My Car
Posts: 137
Quote:
Originally Posted by MikeC View Post
Awesome, not sure how I missed this one. Makes my little refresh seem like childs play. Looking forward to seeing more updates as I may tackle the underside on mine come winter time, maybe.
It's by no means a quick or easy task but it will be worth while doing.
I'm all ready thinking my original thought of being complete in 12-18 months is going to be out the window but I suppose it just takes as long as it takes
infamous pa is online now   Reply With Quote
Mitsubishi Lancer Register
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT. The time now is 20:32.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.