Go Back   Mitsubishi Lancer Register Forum > Technical > Exhaust Systems

Reply
 
Thread Tools Rate Thread Display Modes
Old 20-03-2017, 17:18   #1
richyx
Senior User
 
Join Date: Sep 2011
Posts: 2,958
exhaust hits subframe or sump e9

having a proper headache with this today to the point i may just let someone else have the head ache

im using a v band downpipe off a gt30 and a nur spec r recieved my decat to day so was hoping for a simple fitment

whats happening is off ther decat to the down pipe i have about a cm gap, no probs will pul on mounts when done up

well when it gets done up the whole enitre system moves upwards about an inch

ive loosened the turbo, turbo elbow, downpipe etc, and nothing works, i took the rear subframe mount off and managed to get clearence off the subframe

downside is exhaust moves towards drivers side and now hits the sump

no matter what i do its hitting the sump or subframe

its like the angle on the decat flange should be at an angle and not flat or its slightly too short

only option i can think of at this moment is a small spacer between downpipe and decat but unsure if this will work or mod the rear bracket as i can shift the exhaust back over i think but i still think it touches unsure as ive given up
richyx is offline   Reply With Quote
Old 20-03-2017, 18:52   #2
Mita
Senior User
 
Join Date: Jul 2013
My Car
Posts: 5,523
Don't give up! You said the same with the engine mount and it came good

Sounds like either flange is at wrong angle or the d pipe is bent ?
__________________
Evo 5 Rs 5 year build
Mita is online now   Reply With Quote
Old 20-03-2017, 18:59   #3
adamfitz
Senior User
 
Join Date: Apr 2013
Posts: 713
ive got a similar issue after fitting a hks hipower silent on my 6. was hitting transfer box initially, turned the decat round and it cured that but now hits subframe!
taken the plunge just to get the downpipe modified!
adamfitz is offline   Reply With Quote
Old 20-03-2017, 21:19   #4
richyx
Senior User
 
Join Date: Sep 2011
Posts: 2,958
on my 5 i had to have an adjustable decat made, ive ordered a 10mm spacer so hopefully it will cure it but as mita says its like the flanges are at the wrong angle, as in they shouldnt be flat and slightly angled

but will see later this week lol
richyx is offline   Reply With Quote
Mitsubishi Lancer Register
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT. The time now is 09:28.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.