Go Back   Mitsubishi Lancer Register Forum > General Stuff > Lancer EX 2000 Turbo

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-11-2016, 17:29   #1
hugla
Registered User
 
Join Date: May 2006
Posts: 203
Looking for axle silentblocks

Does someone can help me to find back axle silentblock for lancer turbo ?
hugla is offline   Reply With Quote
Old 11-11-2016, 19:26   #2
rallitubby
Registered User
 
Join Date: Aug 2003
Location: new zealand
Car: 2000 l turbo lancer ex
Posts: 252
yes pm me
rallitubby is offline   Reply With Quote
Old 27-01-2017, 20:57   #3
hugla
Registered User
 
Join Date: May 2006
Posts: 203
i have not your PM
hugla is offline   Reply With Quote
Old 28-01-2017, 07:07   #4
stu8
Senior User
 
stu8's Avatar
 
Join Date: Aug 2003
Location: Southport
Car: Evo V - geekmapped.com
Posts: 20,120
Quote:
Originally Posted by rallitubby View Post
yes pm me
Quote:
Originally Posted by hugla View Post
i have not your PM
Neither of you can PM as you aren't payed up members

Stu
stu8 is offline   Reply With Quote
Old 28-01-2017, 12:11   #5
Werner CH
Registered User
 
Join Date: Sep 2008
Car: Lancer 2000 Turbo, Evo VI TME, Speed Triple 955i
Posts: 12
Currently I am looking for a front axle set and a rear axle set from Superpro.
Once I have everything, everyone can buy from me.
__________________
Lancer 2000 Turbo, Evo 6 TME, Triumph Speed Triple.......
Werner CH is offline   Reply With Quote
Old 28-01-2017, 13:56   #6
Dave F
Registered User
 
Join Date: Feb 2003
Location: Bristol
Car: Chevette with Lancer EX2000 Engine / Gearbox / Axle / LSD. MPI, Intercooled, Evo 3 Pistons & Turbo
Posts: 31
Front Set is the same as for the Starion.

I've within the last 2 weeks just fitted some from Superflex, part numbers as below:-

1 x SF264-2092B-8K,
1 x SF264-0184K,
1 x SF264-1109K,
1 x SF264-1405K

Rear set would be ideal though if anyone can advise where to get them.

Cheers,

Dave
__________________
1975 Vauxhall Chevette with Intercooled Lancer EX2000 Engine running MPI with T3 Turbo & Omex ECU

Complete Black 1981 Lancer EX2000 Road Car (No. 037); 1982 Lancer EX2000 Track Car (No. 334); White 1982 Lancer EX2000 Donor Car (No. 374)
Dave F is offline   Reply With Quote
Old 28-01-2017, 19:05   #7
Tintin
Registered User
 
Join Date: Nov 2006
Location: Ipswich
Car: 2 Lancer Ex2000 turbo's
Posts: 66
Are you guys on about bushes for the trailing arms?. If so they are No longer available from Mitsubishi, so your bes bet is to get them manufactured independantly.
__________________
You think more of that car than me
Tintin is offline   Reply With Quote
Old 28-01-2017, 19:50   #8
Dave F
Registered User
 
Join Date: Feb 2003
Location: Bristol
Car: Chevette with Lancer EX2000 Engine / Gearbox / Axle / LSD. MPI, Intercooled, Evo 3 Pistons & Turbo
Posts: 31
Hi Pete,

Cheers for the confirmation & I think we've all tried Mitsubishi & all the well know others at some time so I was wondering if anyone had actually found an independent but sadly I'm guessing not?

Did you have to change these on your car?

Dave
__________________
1975 Vauxhall Chevette with Intercooled Lancer EX2000 Engine running MPI with T3 Turbo & Omex ECU

Complete Black 1981 Lancer EX2000 Road Car (No. 037); 1982 Lancer EX2000 Track Car (No. 334); White 1982 Lancer EX2000 Donor Car (No. 374)
Dave F is offline   Reply With Quote
Old 29-01-2017, 09:14   #9
Tintin
Registered User
 
Join Date: Nov 2006
Location: Ipswich
Car: 2 Lancer Ex2000 turbo's
Posts: 66
Hi
Yep I've changed all the bushes on the rear of my LT, I managed to get the last set of bushes from Mitsubishi Japan.

It seems that the only option now is to get them spun out of poly, to do this you'll need the measurements or the old bushes for reference. There are 3 bushes per trailing arm, all different sizes so you'll need 2 of each.

One option open is that I'm travelling to the Philippines in October, and if you look at Wilkins' thread "old school racers" you'll see that there are several Lancers out there (non turbo) but share a majority of the parts. I will ask around and see if the bushes can be made over there, or even if some of the dealers have some old stock kicking around.
__________________
You think more of that car than me
Tintin is offline   Reply With Quote
Old 29-01-2017, 14:47   #10
86Paul
User
 
Join Date: Jan 2016
Posts: 35
Bushes

I am pretty sure the the front and rear parallel bushes are the same diameter and the transverse ones are a smaller diameter. All thats needed are the internal diameter of the bush location and the width of the body bracket that way Superflex or whoever can manufacture the top hat bushes and sleeves. Other option is to cut the bushes off and replace with rose joints or as I am doing manufacture new arms with rose joints. I am also manufacturing new top arms with rose joints but if you have lowered the rear of the car you need to make the top arms shorter to maintain the correct geometry. Also whilst on suspension if lowering the front its worth adding a spacer between the strut and lower arm to maintain a better geometry. Tintin Pete could you drop me a text 07593 424777 so i can give you a call about some missing parts I need. Thanks.
86Paul is offline   Reply With Quote
Old 10-02-2017, 21:08   #11
Tintin
Registered User
 
Join Date: Nov 2006
Location: Ipswich
Car: 2 Lancer Ex2000 turbo's
Posts: 66
Quote:
Originally Posted by 86Paul View Post
I am pretty sure the the front and rear parallel bushes are the same diameter and the transverse ones are a smaller diameter. All thats needed are the internal diameter of the bush location and the width of the body bracket that way Superflex or whoever can manufacture the top hat bushes and sleeves. Other option is to cut the bushes off and replace with rose joints or as I am doing manufacture new arms with rose joints. I am also manufacturing new top arms with rose joints but if you have lowered the rear of the car you need to make the top arms shorter to maintain the correct geometry. Also whilst on suspension if lowering the front its worth adding a spacer between the strut and lower arm to maintain a better geometry. Tintin Pete could you drop me a text 07593 424777 so i can give you a call about some missing parts I need. Thanks.
Sorry Paul only just picked this up. Will text you tomorrow mate.
__________________
You think more of that car than me
Tintin is offline   Reply With Quote
Old 11-03-2017, 03:03   #12
rallitubby
Registered User
 
Join Date: Aug 2003
Location: new zealand
Car: 2000 l turbo lancer ex
Posts: 252
Rear suspension bushes

i have facebook messaged you Hugla.
I have new rear bushes avaialble
rallitubby is offline   Reply With Quote
Old 11-03-2017, 20:15   #13
hugla
Registered User
 
Join Date: May 2006
Posts: 203
i did not received
[email protected]
hugla is offline   Reply With Quote
Mitsubishi Lancer Register
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT. The time now is 23:13.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.