Go Back   Mitsubishi Lancer Register Forum > General Stuff > Lancer EX 2000 Turbo

Reply
 
Thread Tools Rate Thread Display Modes
Old 19-03-2012, 10:08   #31
CUL053
Junior User
 
Join Date: Sep 2011
Posts: 23
Here we go...here's pics of where it goes and how it fits!
(note, the clip is broken )



CUL053 is offline   Reply With Quote
Old 19-03-2012, 12:30   #32
BRIGHTON LT
Senior User
 
Join Date: Oct 2007
Car: Lancer Turbo
My Car
Posts: 142
clip

Hi Chris

The MB147285 is not the clip you need , I know this as ordered these only to fine out the info on the parts catalogue was incorrect .
I am 99% sure the clip you need is MB189627 , I will order 1 today so make sure, it will be about a week before I get it , I will post a picture as soon as it arrives.

rgds

Kevin
Attached Images
 
BRIGHTON LT is offline   Reply With Quote
Old 19-03-2012, 20:09   #33
Raph
HaDoKen
 
Join Date: Jun 2007
Location: germany
Car: evo iv
My Car
Posts: 4,123
here, i found a bodyshop shop manual Mitsi Lancer from 1980

http://www.ebay.de/itm/350547247242?...1#ht_500wt_715
__________________
Press cntrl+alt+del to view sig.
Raph is offline   Reply With Quote
Old 20-03-2012, 07:02   #34
CUL053
Junior User
 
Join Date: Sep 2011
Posts: 23
Raph thanks heaps - except I can't read German to bid on it! Is it German? haha
These come up fairly often in Japan...but theyre not cheap

Kevin! You champ!
I thought I'd be proactive and order the parts you mentioned...just in case theyre right...I really hope so!

My question is though, why is part MB189627 specified as a rear part? All the clips in my car look the same from what I see...but as mentioned, all are broken...

EDIT: I found a local clip as an alternative to MB147285...but seeing as I now know I can get the original ones, I thought I'd buy these also

Here's my invoice...
(btw, we have a 3 week wait here...minimum! But thats ok...)


Last edited by CUL053; 20-03-2012 at 07:06..
CUL053 is offline   Reply With Quote
Old 20-03-2012, 10:34   #35
BRIGHTON LT
Senior User
 
Join Date: Oct 2007
Car: Lancer Turbo
My Car
Posts: 142
Hi Chris

There should not be any MB147285 clips needed to hold any of the scuff plates on .
Once I get a MB189627 I will post a picture .

To confirm the correct part number for the clutch master cylinder is MB012163
this is £125.79 plus vat , this is a 20 days delivery time to us .

rgds

Kevin
BRIGHTON LT is offline   Reply With Quote
Old 20-03-2012, 18:05   #36
nitro20
Registered User
 
Join Date: Mar 2012
Posts: 20
Great car and great swap i will give you a pm if i see any parts you are looking. BR
nitro20 is offline   Reply With Quote
Old 21-03-2012, 00:08   #37
CUL053
Junior User
 
Join Date: Sep 2011
Posts: 23
Thanks nitro20...but I can't PM yet sorry, I'll become a full member soon

Kevin, sorry mate...I didn't explain myself properly...
I bought MB147285 for my A-pillar trims...I assume thats where they go? Theyre identical to mine, which are also broken!

I'm confused about MB189627 as the receipt above lists it as a rear part...is this correct? Are there other part numbers for the scuff plates?
EDIT: I love the internet! I found a diagram that contains an image of MB189627...looks like you're right Kevin, thanks heaps! (11) http://www.factorychryslerparts.com/...e/000018JS.jpg

Regarding the master cylinder, I've had mine rebuilt and polished! So I don't really want a new one...I just want the fluid reservoir. I know a local lancer uses the same part...I'll get a second hand one and restore it I think.

Last edited by CUL053; 21-03-2012 at 02:40..
CUL053 is offline   Reply With Quote
Old 21-03-2012, 09:57   #38
BRIGHTON LT
Senior User
 
Join Date: Oct 2007
Car: Lancer Turbo
My Car
Posts: 142
b

Hi Chris

I am sure that MB189627 is correct , on my parts look up it describes the part as "CLIP,SCUFF PLATE" no mention of front or rear.
Sometimes when parts suppliers name a part they may list as rear however it will fit in other areas as well.

Hope this answers you question .

rgds

Kevin
BRIGHTON LT is offline   Reply With Quote
Old 27-03-2012, 14:53   #39
PaulS
Senior User
 
Join Date: Jun 2001
Location: Manchester
Car: Solid, rustless EX 2000
Posts: 254
I regularly see Starion clutch master cylinders on ebay, brand new for around £30 - I think this is the same part....
__________________
Paul
PaulS is offline   Reply With Quote
Old 28-03-2012, 07:48   #40
BRIGHTON LT
Senior User
 
Join Date: Oct 2007
Car: Lancer Turbo
My Car
Posts: 142
Hi Chris

The clip has come in today, but it is not the correct 1 ,
will look in to this and re advise on another part number .

rgds

Kevin
Attached Images
 
BRIGHTON LT is offline   Reply With Quote
Old 29-03-2012, 07:46   #41
CUL053
Junior User
 
Join Date: Sep 2011
Posts: 23
PaulS - thanks heaps...I just need the reservoir...hopefully one of the sellers will be able to supply one!

Kevin - Shame on the clip Thanks for trying. I coincidentally found those clips 2 days ago from a 1985 Mitsubishi Pajero...they dont suit sadly, and can't be made to suit either

I'm on the verge of drilling through it and using self tapping screws
CUL053 is offline   Reply With Quote
Old 29-03-2012, 10:02   #42
BRIGHTON LT
Senior User
 
Join Date: Oct 2007
Car: Lancer Turbo
My Car
Posts: 142
Hi Chris

You cannot drill to fit the scuff plates, I am waiting on the factory for an update on a another part number.
I have bought these clips a few years ago so I am sure we can still get them .


With reference to the clutch bits, as follows
Resivior MA115416 £5.48
Resivior clip MB012155 £2.13
Resivior Cap MA151577 £6.63

You should still be able to get these from your main dealer .

Rgds


Kevin
BRIGHTON LT is offline   Reply With Quote
Old 02-04-2012, 09:51   #43
CUL053
Junior User
 
Join Date: Sep 2011
Posts: 23
Quote:
Originally Posted by BRIGHTON LT View Post
Hi Chris

You cannot drill to fit the scuff plates, I am waiting on the factory for an update on a another part number.
I have bought these clips a few years ago so I am sure we can still get them .


With reference to the clutch bits, as follows
Resivior MA115416 £5.48
Resivior clip MB012155 £2.13
Resivior Cap MA151577 £6.63

You should still be able to get these from your main dealer .

Rgds


Kevin
Hey Kevin, thanks heaps mate...I hope you're right. You're my last hope...if I can't get a lead thru you then I'm going to have to mount them some other way.

I've just pulled some parts out of storage and realised this...what have you guys done to replace these? Mine hast rusted UNDER the rubber coating...
EDIT: These go on each of the doors, and clip into the door in between the door skin and the glass. Is Australia theyre called "door belts" apparently...


Last edited by CUL053; 02-04-2012 at 09:52..
CUL053 is offline   Reply With Quote
Old 04-04-2012, 18:40   #44
PaulS
Senior User
 
Join Date: Jun 2001
Location: Manchester
Car: Solid, rustless EX 2000
Posts: 254
Door trims

I had the same problem & bought new ones - not cheap though, but make the finished car much nicer
__________________
Paul
PaulS is offline   Reply With Quote
Old 06-04-2012, 06:54   #45
CUL053
Junior User
 
Join Date: Sep 2011
Posts: 23
Quote:
Originally Posted by PaulS View Post
I had the same problem & bought new ones - not cheap though, but make the finished car much nicer
Hey Paul, I can only imagine! Are these still available new? If so, please tell me you have the part numbers.

Nothing like OEM! I bought 6 Taiwanese tail lights and ended up restoring my originals...!

I should really buy that parts book from Yahoo...
CUL053 is offline   Reply With Quote
Mitsubishi Lancer Register
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT. The time now is 10:40.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.