Quote:
Originally Posted by stu8
its the fronts that need a little work, rears are a straight fit
Fronts you can either get shims (like the ones made by Grant260 / GBEnterprises above) or you can drill the front hubs out from 12mm to 14mm, then use the 14mm bolts off a later evo, you will need to make up spacers to go either side of the hub this way, as the mounting point for later struts on the hub is a few mm wider
Stu
|
could u give me some pics about the Grant260? e-mail or thread,
[email protected]
appreciate~~