Lancer Register Forum banner

bleeding clutch.... have i done it correct???

4K views 7 replies 5 participants last post by  fq-300-danny 
#1 ·
when you bleed the clutch you push the peddle down turn the bleed nipple then let the peddle come back up on its own then tighten bleed nipple up?

just seen this http://evomoto.com/tech_info.php?tPa...70dcb9622f475b

link says pull up the clutch peddle??? i just let it come up on its own with the bleed nipple open? as at first when i opend the bleed nipple to let the air out and closed it back up the clutch peddle stayed down ?? (i thought it would of came straight back up) so i opened the nipple and the peddle started to raise up slowly....

have i done it wrong as it now even harder to get it in gear..... :smthumbup
 
#7 ·
not bled the clutch yet doing it tomz... its been a pain to get in 2nd gear since doing it wrong last time :mad: just hope that when i do it right it will be ok ish... will get the syncros done in couple of months how much would i be looking at about for the 2nd and 3rd syncros to be done? would the gearbox be more hard to get in gear if i have put to much oil in? :smthumbup
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top