Lancer Register Forum banner

EPS motorsport doing the Manx Classic 2012

9K views 40 replies 14 participants last post by  the hunter 
#1 ·
Hi guys

I am heading over to the Isle of Man to do the Manx Classic in the Evo 6 to gain some much needed licence signatures to get my national A licence. Doing three days of competition is there any fellow Lancer owners in the Isle of Man that could contact me just in case I need any parts etc while I am there?
 
#4 ·
Hi guys

I am heading over to the Isle of Man to do the Manx Classic in the Evo 6 to gain some much needed licence signatures to get my national A licence. Doing three days of competition is there any fellow Lancer owners in the Isle of Man that could contact me just in case I need any parts etc while I am there?
Hi Dave

I doing the 3days to with another MLR member, i live on the IOM.

Parts will be a problem :lol: but i have a good spanner man here if you need 1 :smthumbup whats the spec of you 6 ??

A couple of my mates will be running caterhams they usually win every year !! this will be my 1st time and i cant wait
 
#8 ·
Hi guys

I am heading over to the Isle of Man to do the Manx Classic in the Evo 6 to gain some much needed licence signatures to get my national A licence. Doing three days of competition is there any fellow Lancer owners in the Isle of Man that could contact me just in case I need any parts etc while I am there?
Dave do you mean your doing the Manx National in May ? if so give me a ring ;)
 
#9 ·
Manx Classic 2012

Governor's Sprint, Douglas - Thurs 26th April (12 noon to 3pm and 6pm to 9.30pm)
The Sloc Hillclimb, Port Erin - Fri 27th April (9.15am to 4.30pm)
Lhergy Frissell Hillclimb, Ramsey - Sat 28th April (9.15am to 5pm)
 
#15 ·
I have changed the flywheel to a EVO 8 unit and the clutch is a std EVO 9 unit, for the power I have it will be fine and still drive like std also. I am only going to use the MoTeC for the hillclimbs and the OEM ECU for the MLR rounds and 1.4 to 1.5 will be fine.

This will prob last around 1-2 runs and then the laptop will be back out for some more hp :) and after driving your car doesn't help also!!
 
#17 ·
Had a wicked day today! the boss let me have the day off to test the Mac it Curborough. Was good to fine tune the MoTeC and also adjust the launch control. ****ed down rain all day but I have to say I am very happy with the AD08's in the wet thy have very good grip and feed back.

Got some vids also thy are just uploading
 

Attachments

#19 ·
Well we are here! and the weather forecast says that it will be the worst rain in the next 48 hours.


Also the first challenge of the weekend was at the port, we had the VPower fuel taken from as at the crossing. And as there is no 98 or good 98 over here we have been helped out by PACE by giving us some Carless Turbo Rally fuel. (Time to add a little power on the mapping side). So the first few runs will be spent sorting the mapping. Cant wait..


Scrutineering is at 5pm tonight at the TT pits and there is also a free dinner for all so should be a good night also.
 
#21 ·
Well we are here! and the weather forecast says that it will be the worst rain in the next 48 hours.

Also the first challenge of the weekend was at the port, we had the VPower fuel taken from as at the crossing. And as there is no 98 or good 98 over here we have been helped out by PACE by giving us some Carless Turbo Rally fuel. (Time to add a little power on the mapping side). So the first few runs will be spent sorting the mapping. Cant wait..

Scrutineering is at 5pm tonight at the TT pits and there is also a free dinner for all so should be a good night also.
Dave the super here is 99 tested :smthumbup
 
#33 ·
Dave would you just check your times for the Sloc ( off your vid not the timimg ), as we know there was a 2 sec time delay with the black scooby and i have just watched your vid and im making it a 57 sec run ??

Cheers Ste
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top