PDA

View Full Version : turbo sizing spreadsheet


oli goon
04-02-2002, 12:25
after a slow friday afternoon i did a spreadsheet for turo sizing for the TD05-16G6.

I have sent a copy to claudius. any one else want a copy.

I'd apprecaite any feedback from you teccies as i will add in the map for Blades big td06 soon.

Has anyone found the map for the TD05HRA-15GK2 on the tme gsr? Presumably the turbo has some id stamped on it somewhere anyone know where?

AndyF_RSX
04-02-2002, 12:31
Oli,
I've been busy putting together a similar spreadhseet and have got the 16g6 and 20g maps into Excel format so that you can plot on the graph, the appropriate points for the turbo. I've got maps for the following td04 9B, td04 13g, td04 15g, td04 18t, td05 14g, td05h 16g, td05h 16g 6, td06 16g, td06 20g but like everyone else, no map for the TME 15GK2. I'm busy putting these maps into the program to put together a all round effort.

Could you send me you're spreadsheet for comparison please.

Cheers

Andy

AndyFox21@aol.com

MC CUSTARD
04-02-2002, 16:19
i have a theory about the 15 ,please can someone find a map for it.

Wreckleford
05-02-2002, 00:04
I would love a copy of this spreadsheet. Mail to marcus@kasnet.com please.

sunny
05-02-2002, 11:18
sorry I do not understand graphs and torque etc etc, can anyone tell me what is best for mid range power and what to get it and what can it do for me. (EVO 6 GSR)


lawrence

evotrak
05-02-2002, 18:50
oli

could i to please have a copy

andrewn@evotrak.com

thanks in advance, andrew

aquamist ordered and will be fitting shortly!

adam
18-02-2002, 23:25
I would love a copy of this...we are putting our Evo website together now (we are a mitsu/Subaru tuner in the US)..this info would be most helpful.

We have an E39A GVR-4 that is extensively tuned...hybrid 20G housings with t3/T4 internals (ball bearing), massive fmic, 660 injctors, HKS VPC, twin power, etc. etc....should be running low 12's, high 11's this summer...on a 16G and 550's, stock mass air, car ran 12.80's @108 (not too shabby for a 3,480 lb car!)

adam
Z-1 Performance

oli goon
22-02-2002, 12:17
adam, what's your e-mail address?

evotrak
24-02-2002, 09:40
thanks oli

looks pretty accurate too, made a couple of changes see what you think
been experimenting with what would happen if i spec my cams to push ve up by about 1000, looks like it will net a nice power increase and make life a bit more bearable det wise at 5000

andrew

BadBoyBeltran
09-11-2003, 13:11
DO you guys want a map of the TME VI GSR turbo (15GK2) on the VI or on any car? I'm trying out this turbo for my USDM VIII.

Let me know how I can help.

Also, any suggestions/comments? Thanks.

wrxkilla
10-11-2003, 03:14
hmmm

all htese maps would be a very useful read....



:) :) :)

jamming_high
10-11-2003, 06:14
love to have a copy ... jamming_high@yahoo.com

Norw
10-11-2003, 07:19
Yes a copy please; erland.volden@neas.no
Thanks in advance:D

DrDrag
12-11-2003, 18:18
oli could you send me a copy on my email..
its moiemoie@hotmail.com

lanceevo5
24-11-2003, 18:50
Originally posted by adam
I would love a copy of this...we are putting our Evo website together now (we are a mitsu/Subaru tuner in the US)..this info would be most helpful.

We have an E39A GVR-4 that is extensively tuned...hybrid 20G housings with t3/T4 internals (ball bearing), massive fmic, 660 injctors, HKS VPC, twin power, etc. etc....should be running low 12's, high 11's this summer...on a 16G and 550's, stock mass air, car ran 12.80's @108 (not too shabby for a 3,480 lb car!)

adam
Z-1 Performance


hey adam where you from?? ohh and nice car would love to try it on the track myself if you wouldnt mind? well email me back at azyanlancer@hotmail.com thanxs much cheers

Lanceevo5

Evo Nut
26-11-2003, 19:20
I would like a copy please.
timplowe@yahoo.co.uk
Cheers Tim.

wrxkilla
26-11-2003, 22:18
wasnt someone going to upload them somewhere?

:)