PDA

View Full Version : Enzo Racing Custom Pistons and Rods


JIGGA
08-03-2008, 15:23
We at Enzo Racing believe that these are the best set of pistons and rods money can buy.

We start off with the pistons. These are custom designed to our specifications using only the best material and forging processes. These are FLAT TOP PISTONS to suit all evos 4 and up. Check out the WRIST PIN that comes with these babies! WOW!! Valve Pockets have been relieved to suit the biggest valves you might want to throw into your motor.

THESE PISTONS ARE HARD ANODIZED FOR USE WITH METHANOL AS IT PREVENTS CORROSION

85.5mm BORE

9.6-7 to 1 COMPRESSION

PM me for pricing, details, design features, etc..

http://img365.imageshack.us/img365/8415/pistonsrodszl0.jpg

JIGGA
08-03-2008, 15:46
Our custom made ALUMINUM RODS are the best in the business. As more and more evo enthusiasts begin to acknowledge the advantages of aluminum rods, we are proud to introduce the best alu rods you'll see, PERIOD! Aluminum Rods are the standard in rods for all Pro-Stock Dragsters here in the USA, and they are very reliable and the benefits are immense.

WE HAVE DESIGNED THESE TO RUN WIDER BEARINGS FOR BETTER CONTACT SURFACE

First, we start with pics of the rods:

http://img383.imageshack.us/img383/6366/rodsrk6.jpg

http://img374.imageshack.us/img374/2725/rods2kq6.jpg

Did you pay attention to some of the design features? The one we noted immediately was the fact that no caps are interchangeable, nor can you install them backwards. The locking design on them is soo cutting edge. They dont use a dowel pin to locate the rod caps like in most competitors designs, instead they use a proprietary "grooving" technique that is simply amazing. Also, once you loosen the ARP hardware, the caps just pop out as if they were pressure released. Simply amazing I tell you!! Check out the caps:

http://img369.imageshack.us/img369/2930/rodcapsun6.jpg

Side by side comparison with a competitors Aluminum Rod. Obviously ours is not only prettier ;), but its designed better and more efficiently. Everything about it is better. The competitors looks like crap compared to ours. If I was them I'd be ashamed to put my name on the rod like that :D :mhihi::

http://img357.imageshack.us/img357/2671/rodcomparisonym8.jpg

Our rods requires 1 additional machining step, and 2 additional machining steps to the bearings.

WE WILL SUPPLY THESE WITH OUR CUSTOM MACHINED ACL RACE SERIES BEARINGS

PM me for pricing, details, etc...

evo400
08-03-2008, 18:01
Refering to Keith Grodens rods as CRAP is a bit of a insult Jigga .

You need to remind yourself AMS Buschur EVO400 Shepracing all swear by Groden .We use both Groden and MAGNUS rods which theses are a copy off BTL !!!! Which we also use in our motors .

JIGGA
08-03-2008, 18:13
Dave, I did not insult Grodens rod as far as functionality. All I said is that compared side by side the Grodens dont look as good. Im sorry if I insulted the rods you use. Grodens have been used successfully by many Mitsu owners, however the rods we offer are of similar design and feature as the ones in Pro Stock vehicles like Warren Johnson for example.

Magnus rods are of very similar design if not the same. We are very close to Marco and know his rods are excellent.

JIGGA
17-03-2008, 17:10
top

JIGGA
07-04-2008, 13:55
...