Mynes Performance exhaust manifold

[scottl]

Special offer of one only (at this price) ;

Supplied with a lifetime guarantee against manufacturing defects and cracking.

Here are the specs of the Mynes replacement manifold:
- 1.25" SS304/S40 pipes (0.163" or 4mm in Thickness)
- 1.5"- thick Stainless steel head and turbo flanges (hard steel - not MILD Steel)
- Our custom head Flanges (with the Mynes Logo) is port-matched to the stock head - many competitors use the smaller-port flange for their stock replacement manifold.

This isnt a cheapo ebay special

http://img.photobucket.com/albums/v46/scottlowe/mynes1.jpg

http://img.photobucket.com/albums/v46/scottlowe/mynes2.jpg

This is a US manufactured highest quality piece of exhaust engineering.

Check out the thickness of the pipework

http://img.photobucket.com/albums/v46/scottlowe/mynes5.jpg

Been tested in the US to produce 5 ATW BHP and spool 250 rpm earlier.

Now we want to get our own data on UK Dyno, hence this offer.

RRP £470
Offer £425.

Fitting service available, and we can arrange/deal with dyno testing if the lucky buyer is happy to go along with this.

[Evoedd]

is that a delivered price?

steve

[scottl]

I would prefer to fit and dyno test it, but if you could deal with this I would do free delivery :)

[Uncle Winnet]

where would the testing be done

is the ok to use with a stock evo 5 turbo

john

[scottl]

1st choice would be The Racing Line.

If fits all standard frame turbos. SAS (EGR) would need to be removed if not already done.

[Uncle Winnet]

cool i have an evo 5 with following mods

fully rebuilt engine done 8jun 2006
with omega pistons
rcm h section uprated con rods

all new bearings and gaskets

runing 300.8bhp and 364.3nm torque
on 1bar standerd turbo

would be willing to try this

what would the deal be with dyno testing

thanks john

[scottl]

Sounds like a good car to test it on

We would basically need to do a dyno run with your car as it is now, then swap manifolds and dyno again on the same day :)

[Uncle Winnet]

so how much is the whole deal

[scottl]

YHPM

[scottl]

Still available. One of these exact items has just produced a 25 ATWHP increase in the U S of A!

If this doesn't sell this month it will be going on our car as a Christmas treat :D

No more mega deals like this then though :eek:

[BlackMolley]

This is truly a piece of art by the look of it and will definately gain some BHP, however ...

One of these exact items has just produced a 25 ATWHP increase in the U S of A!

In the US of A you gain 20 BHP just by emptying your ashtray ..

[scottl]

So buy this, and empty your ashtray, you will have 45 bhp more :D

[BlackMolley]

Already got an aftermarket exhaust manifold.

[ADAM3441]

Would make a nice christmas pressie......

http://cgi.ebay.com/ebaymotors/MYNES-Evo-Stock-Replacement-Manifold-Evolution-8-9_W0QQcmdZViewItemQQcategoryZ33632QQihZ008QQitemZ180193854827QQrdZ1QQsspagenameZWD2V

Stupid computers, Its a link to a new Mynes manifold from USA for ablut 320 quid. If you look an ebay you can find it but this link isnt workin :mad:

[D.D.A]

hi scotti can you give me the hole price on the deal with the fitting and dyno thanks

[chaz83]

Hi, i have an EVO 7 with autronics, HKS complete system with de-cat, SARD FPR, HKS Filter, Walbro Pump. It is running about 370BHP on a standard turbo running 1.6 bar Peak.

Would be interested but would need the EGR removed
cheers

[scottl]

Sorry, missed this post. I am fitting one of these to our own car next week so will have back to back results to publish.

This one is still on offer though, come on guys, try something different ;)

[scottl]

More stock of the standard version arriving very soon. Fitting service available.

We will have UK dyno 'before and after' graphs available very soon.

[scottl]

New stock now available, please get in touch for details :)

[youngsyr]

Any news on the dyno testing?

[scottl]

The ones we have sold have been fitted as part of a package so we have no definitive figures yet. Would you like to help?

[Taylor8]

might be able to help ya depends on what I do with the car next

[scottl]

Havent you already got one??

[Taylor8]

yeah but i could put the std back on, its only an hours work, as I said depens on what I do next

[youngsyr]

The ones we have sold have been fitted as part of a package so we have no definitive figures yet. Would you like to help?

If you were just around the corner, Scott, I would happily donate my car for a back to back test of the manifold, but unfortunately you're a little way from the bright lights of London Town, :( and I'd prefer to see proven results before I commit to spending £425 on something that might not yield as much improvement as £425 spent in other areas.

[scottl]

Ive fitted one to our car this afternoon so will get it dynoed asap :)

[staffi]

Here it is guys on mine, VG Piece of kit, great build quality and a VG Price too...



http://i49.photobucket.com/albums/f259/postty/Picture184.jpg


http://i49.photobucket.com/albums/f259/postty/Picture185.jpg

[scottl]

:smthumbup Pete

[staffi]

:smthumbup Pete



;);)

[Taylor8]

here's a pic of mine fitted:coolsm:

http://i158.photobucket.com/albums/t85/afc1983/en2.jpg