bushes on the font

[jackal2513]

questions questions,

which ones should i replace on eth front ?
what make should i use ?
what improvements can i expect ?

note that i do not wnat to make the car feel too manic or harsh


regards



R

[Norw]

I don`t know much about this subject.
But You could have a look at some of Blade`s mails or his home page.
Perhaps look into the spec for the Evo VII Extreme versions; the S: roll bar bushes, susp. strut rubber top mounts, steering rack mounts- all changed to Gr N, and revisions to susp. geometry. They don`t say which mods..
Good luck.

[MT-EVO]

I fitted Powerflex front kit to my 6 and it greatly improved the feel of the steering and did not effect the ride at all.

[Blade]

uprate the front wishbones, the steering rack, top mounts and anti-roll bar bushes.

You can get them some from Powerflex, and Grp N from Ralliart/co-ordsport

You will lose any play in the steering wheel, and sloppiness in the wishbones, and generally turn in will improve, feeback and acuracy of steering - as well as keeping the geometry intact on hard cornering.

[BBE7]

Jackal

I have started with ralliart GRpN topmounts and steering along with springs and rear brace. Coorsport also altered the geometry to suit fast road-track.

From what I can gather its a suck it and see excersie...too much and u can make it tiresome on the road but its a personal thing.

Pls let me know what u decide and the results.

PS have u done any engine mods, if so any advice...a lot of the threads seem to concentrate on peak power rather than achieving a truly enjoyable driving experience.