PDA

View Full Version : The dentist and evo400 - Top Marks

glen4
13-05-2006, 16:24
Had my car into Scoobyclinic today for the Ecutek remap, made just over 275hp @ wheels or 362 pub talk figure, but that's only half the story, the car is so much smoother and fires through the gears soo much quicker, it's difficult to believe it's the same car. Not only that got more MPG into the bargain on the trip home, done 240 miles and still got some fuel left, never done that before, even on the trip up this morning I had to stop and fill up!!

Thanks Dave and Sam, one satisfied customer.
Eatpies99
13-05-2006, 16:30
awesome mate, bet ur well chuffed. :D
glen4
14-05-2006, 08:54
Too right I am, probably the best £ for horsepower/drivability mod there is available.
Sloany
14-05-2006, 08:59
cool :coolsm:
craig5
15-05-2006, 20:13
i too would like to thank's sam and dave for saturday two top bloke's-i was pleased to have meet you too glen it was a shame you had to go back so early
glen4
15-05-2006, 20:56
Craig
Yeah, good to meet you too. how did your car go on the rollers? Had to leave early, got back in time for the last 1/4 hour of the first half of the cup. Shame we didn't get the result we wanted.
craig5
16-05-2006, 08:33
i got 290 atw
MADMAT
16-05-2006, 08:42
Originally posted by craig5
i got 290 atw

What car and spec Craig?
craig5
16-05-2006, 10:12
evo 8 me,dave and sam were hoping for more not too sure if it is coming down to you and dave
craig5
16-05-2006, 10:52
mat my spec is rc full 3" EXHAUST,FUEL PUMP,APS DV,APS CAI,10.5 HOUSING,PIPER 285 CAMS,CARBON PROP,MOTEC,AVCR
MADMAT
16-05-2006, 11:41
Originally posted by craig5
mat my spec is rc full 3" EXHAUST,FUEL PUMP,APS DV,APS CAI,10.5 HOUSING,PIPER 285 CAMS,CARBON PROP,MOTEC,AVCR

Oh dear, a little under powered, what boost was that figure achieved at?
craig5
16-05-2006, 12:06
IT PEAK'S AT ABOUT 1.6 AND HOLD'S 1.45-1.5
craig5
16-05-2006, 12:07
MAT WHAT POWER AT A GUESS DO YOU THINK I SHOULD HAVE MADE
evo400
16-05-2006, 12:19
once the cams issues is sorted it will make 300+ .
unfortunate for you that the history of the cams is somewhat clouded .they certainly didn't perform as the profiles should have . but as we never supplied them we can't say what profiles they are with out having them clocked @ piper .

dave
craig5
16-05-2006, 12:26
DAVE SAM DID SAY SOMETHING ABOUT MY ACTUATOR COULD THAT BE THE CAUSE
craig5
16-05-2006, 12:29
DAVE WHAT DOES clocked @ piper . ENTAIL
Armagedon
12-07-2006, 17:01
Sam & Dave are doing a great job.

In april, i organised a remap week end in france for several evolution. Sam & Dave came to do this job.

First they are very sympatics but it's not the most important.

Second and most important thing, they are very competent.
On eatch evo, in about 10 to 15 minutes of driving test they made a very accurate diagnotic.

On mine, Dave said me my clutch start to fail. One day after, i had my first slippery with my clutch. They told me my stock dump leak and it was true. I replaced it with a PERRIN (Sam sold me) and my boost was +0.15 bar at 6000. Plus, this dump is great no driving issue at all.

Sam work is very good. It's close to be perfect. We are very happy of his work on our cars.

My evo 260 with a full Milltek turboback system 100 Cel/inch high flow cat + AVCR 1.6 bar (holding 1.54 at 6500 exactly) + ITG air panel filter + PERRIN Dump valve + Wallbro = 360 bhp & a fabulous torque of 480 nm.

http://perso.wanadoo.fr/edg/EVO8SYLV.JPG

The only thing i didnt like was the way Sam set my AVCR. My way is better :D I have better performances with my AVCR setting & less spikes. But it was not what we paid him for. ;)

I trust Sam & Dave at 100%.

Thx for your job guys. ;)